Gardena EasyCut 400 Інструкція з експлуатації Посібник з експлуатації - Сторінка 5

Друкувати сторінку

Gardena EasyCut 400 Інструкція з експлуатації Посібник з експлуатації

Setting the working position :

Setting the trimmer

to body height :

Adjusting the plant guard :

Working position 1 :

Trimming without

wheels

The angle of the handle can be set to 3 working positions.

1. Push slider

working position (see scale

2. Let the slider

Setting the handle length :

v Open clamping lever

required handle length and close clamping lever

ATTENTION ! With EasyCut 400, ensure that when adjusting

the handle length the upper part of the handle

twisted.

Adjusting the additional handle :

v Press adjusting buttons in

handle

again.

When the trimmer is set to the correct body size, the body

is upright and the cutting head is angled slightly forwards in

working position.

v Hold the trimmer on the upper part of the handle

additional handle

angled forwards slightly.

Working position

v Turn plant guard

it locks into place.

ATTENTION !

Overloading of the motor.

V When trimming with wheels, working position

2 must be set.

Working position 2 :

Trimming with

wheels

up and set the handle

lock into the required working position.

, extend upper part of handle

to required angle and release the adjusting buttons

in such a way that the cutting head is

through 180° into the required position until

Working position 3 :

Trimming under

obstacles

to the required

again.

is not

on both sides, set additional

Parking position

and