Gardena HighCut 48 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Тример Gardena HighCut 48. Gardena HighCut 48 13 сторінок. Electric hedge trimmer
Також для Gardena HighCut 48: Інструкція з експлуатації Посібник з експлуатації (13 сторінок)
Друкувати сторінку
Extending the telescopic
tube :
D C B A
Starting the Hedge Trimmer :
7
6
F
E
5. Storage
Storage :
7
6
Disposal :
(in accordance with
RL2002 / 96 / EC)
16
The telescopic tube
trimming at high and low level and can be extended in two
stages to a total length of 62 cm.
1. Unplug the mains plug.
2. Open clamping lever
the length required and close clamping lever
3. Open clamping lever
the length required and close clamping lever
DANGER ! Risk of physical injury !
If the Hedge Trimmer does not switch off auto-
A
matically, there is a risk of lacerations.
V Never override the safety devices (e.g. by
Starting the Hedge Trimmer :
The hedge trimmer is fitted with a two-handed safety device
(2 start buttons) to prevent the unit from being turned on by
accident.
1. Remove the protective cover
2. Hold the guide handle
F
button
G
3. Hold the main handle
start button
The hedge trimmer will start.
Switching the Hedge Trimmer off :
1. Release the start buttons
H
2. Slide the protective cover
The hedge trimmer must be stored out of the reach of children.
1. Disconnect the mains plug.
2. Clean the hedge trimmer (see 6. Maintenance) and slide the
protective cover
3. Store the hedge trimmer in a dry, frost free place.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
B
D
/
offers continuous extension for
A
, extend the lower telescopic tube
C
, extend the upper telescopic tube
strapping down one of the start buttons).
6
E
with one hand and press the start
.
G
with the other hand and press the
H
.
F
H
/
6
over the cutter blade
6
over the cutter blade
A
again.
C
again.
7
from blade
.
.
7
.
7
.
B
to
D
to