Gardena SmallCut Plus 350/23 Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Тример Gardena SmallCut Plus 350/23. Gardena SmallCut Plus 350/23 15 сторінок. Turbotrimmer
Також для Gardena SmallCut Plus 350/23: Посібник оператора (9 сторінок), Посібник оператора (6 сторінок)
Друкувати сторінку
Problem
Unit no longer cuts
Cutting filament cannot be
extended or cutting filament is
used quickly
For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
7. TECHNICAL DATA
Turbotrimmer
Motor power consumption
Mains voltage / Mains frequency 230 V / 50 Hz
Cutting filament thickness
Cutting width
Cutting filament supply
Cutting filament feed
Rpm of filament cassette
Weight
Sound pressure level L
Uncertainty k
pa
Sound power level L
WA
Uncertainty k
WA
Hand / arm vibration a
Uncertainty k
a
Measuring process complying with
The stated vibration emission value has been measured according to a standardized
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.
Possible Cause
Cutting filament worn or
too short.
Filament cassette empty.
Cutting filament pulled into the
cassette or stuck together.
The cutting filament became
too dry and brittle (e. g. during the
winter).
The cutting filament frequently
touched hard objects.
SmallCut 300/23
(Art. 9805)
300 W
1,6 mm
230 mm
6 m
Tip mechanism
13,000 rpm
1.6 kg
1)
83 dB (A)
pa
3 dB (A)
2)
measured 92 dB (A) /
guaranteed 94 dB (A)
2.04 dB (A)
1)
4.3 m/s
2
vhw
2.2 m/s²
1)
EN 50636-2-91
2)
RL 2000/14/EC
Remedy
v E xtend the cutting filament
(see 3. OPERATION
"To extend the cutting filament
(Tip mechanism)").
v R eplace the filament cassette
(see 4. MAINTENANCE
"To replace the filament
cassette").
v P ull the cutting filament out
of the filament cassette
(see above).
v P lace the filament cassette in
water for approx. 10 hours.
v P revent the cutting filament
from touching hard objects.
SmallCut Plus 350/23
(Art. 9806)
350 W
230 V / 50 Hz
1,6 mm
230 mm
6 m
Tip mechanism
13,000 rpm
1.8 kg
83 dB (A)
3 dB (A)
measured 92 dB (A) /
guaranteed 94 dB (A)
2.32 dB (A)
4.3 m/s
2
2.2 m/s²
9