GARDENA Flower Box Watering Set
1. Technical data
Transformer with Timer
Encapsulated low-voltage safety transformer with thermoprotection, which prevents damage from over-
loading or short circuits, for use indoors and outdoors.
Input voltage
Frequency
Output voltage
Power
Max. ambient temperature
Protection class
Power cable (supplied)
Pump
Operating voltage
Operating current (max.)
Max. pressure
Max. flow
2. Notes on operating instructions
Translation of the original instruc-
tions from German. Please read
these operating instructions care-
fully and observe the notes given.
Use the instructions to familiarise
yourself with the operating con-
trols, their correct use and the
notes on safety.
3. Proper use
The GARDENA Flower Box
Watering system is designed for
use in domestic environments.
Gardening tools for domestic
applications are not designed for
use in public grounds, parks,
4. Equipment and application
4.1 Contents (fig. A)
The Flower Box Watering Set
consists of the following com-
ponents:
1
1 Transformer with 13 fixed
programmes for selection
2
1 Submersible pump
(operating voltage 14 V)
230 V
50 / 60 Hz
14 V
30 VA
+ 40 °C
II
2 m, type H05-RNF
14 V
1.7 A
1 bar (14 psi)
180 l / h
For safety reasons, chil-
A
dren under 16 as well as
persons not familiar with these
operating instructions should
not use this Flower Box Water-
ing system.
Persons with reduced physical
or mental abilities may use
the product only if they are
supervised or instructed by a
sport centres, roads, agriculture
or forestry.
Compliance with the instructions
provided by the manufacturer
is a prerequisite for using the tool
correctly.
3
25 Inline Drip Heads,
each 2 l / h
10 m Supply Pipe ∅ 4.6 mm
4
(3 /16 ")
15 Pipe Pegs ∅ 4.6 mm
5
(3 /16 ")
6
3 Sleeves
7
2 End Caps (for water pump)
responsible person. Children
must be supervised to ensure
that they do not play with the
product. Never operate the
product when you are tired, ill
or under the influence of alco-
hol, drugs or medicine.
Keep these operating instruc-
tions in a safe place.
The operating instructions also
include the conditions for opera-
tion, repair and main tenance.
8
1 Cleaning Needle
D
3 End Caps
(for Inline Drip Heads)
G
11
Друкувати сторінку