Makita VR251D Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita VR251D. Makita VR251D 17 сторінок. Cordless concrete vibrator
Також для Makita VR251D: Інструкція з експлуатації (8 сторінок)
Друкувати сторінкуMAINTENANCE
Ni-Cd
8
Effective leveling and removal of air bubbles
Removal of the air bubbles is complete after you have
worked the tool throughout each effective range, the con-
crete stops shrinking, and the mortar has risen evenly to the
surface, giving off a light appearance. Gently remove the
operating tool not to leave holes.
NOTE:
•
Vibrating too long in a single place causes concrete
segregation.
•
When the coarse aggregates segregates when placing
001961
concrete, shovel out the coarse aggregate and put it
where there is plenty of mortar. Then use the tool on it.
Don't leave coarse aggregate in the segregated
condition.
When concreting a slope site, always pour from the bottom at
the beginning. This way the weight of the freshly poured con-
crete and vibration will lead to effective removal of air bub-
bles. Conversely, if the pouring is done first from above, the
mortar will separate and eventually slide to the bottom.
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
perform inspection or maintenance.
Recycling the Battery
The only way to dispose of a Makita battery is to recycle it.
The law prohibits any other method of disposal.
To recycle the battery:
1. Remove the battery from the tool.
2. a)
Take the battery to your nearest Makita Factory Ser-
vice Center
or
b)
Take the battery to your nearest Makita Authorized
Service Center or Distributor that has been desig-
nated as a Makita battery recycling location.
Call your nearest Makita Service Center or Distributor to
determine the location that provides Makita battery recycling.
See your local Yellow Pages under "Tools-Electric".
EN0001-1