Gardena 4000/5 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7

Друкувати сторінку

Gardena 4000/5 Інструкція з експлуатації Посібник з експлуатації

Normal mode

(standby)

Press shift key.

Press shift key to return to throughput display, pressure display or standby.

and

RESET key:

In some circumstances ERROR 06 may appear. This does not

impair the further operation of the pump.

8. When the pump has drawn in the water, turn the rotary switch

to RUN.

9. Close shut-off devices in the delivery pipeline again.

The pump switches off automatically when the maximum

pressure is reached. Normal mode (standby) has been reached

(

Change display information:

In operation:

Throughput display in

l/h

(in 100 l/h increments)

In operation:

Pressure display

in bar.

(in 0,2 bar increments)

Normal mode

(display for 3 seconds)

Press shift key.

Normal mode

(display for 3 seconds)

automatically return to throughput display or standby after one minute..

Reset quantity delivered display

If the RESET key is pressed whilst

conveyed in m

This permits the quantity delivered to be measured at any desired

time interval.

➔ Hold RESET key down for 2 seconds.

Restart after a fault:

If a fault has occurred, the pump can be switched on again

prematurely by pressing the RESET key.

➔ Press RESET key.

The frost symbol goes out after the RESET key is pressed.

Press shift key.

since last reset) only the

Standby:

Pump has reached

max. pressure.

Quantity delivered in

since first start-up

(display for 3 seconds)

Quantity delivered in

since last reset.

(display for 3 seconds)

is operating (quantity

display is reset to 0.