Viewing Contacts details
using. If you have any questions about how the name or extension displays to the person
you are calling, contact your system administrator.
1. Select the bridged line you want to use.
2. Press OK to get a dial tone.
3. Dial the telephone number, or call the person from the Contacts list, or call the
person from the Call Log list.
About Contacts
You can save up to 250 names and telephone numbers. For additional information, see
Calling a person from the Contacts
Viewing Contacts details
1. Press Contacts.
2. Select the contact you want to view.
3. Press Details to see all information available for that contact.
Adding a new contact
You can add up to three numbers for a contact.
1. Press Contacts.
2. Press New.
3. Enter the name using the dialpad.
a. Press the number key that corresponds to the letter or number you want to
b. Pause before entering the next character if the characters are on the same
c. Enter remaining letters or numbers.
d. Press Bksp to delete the last character.
e. Press More
g. Press More
h. Select the symbol you want to use.
4. Select the next field.
5. Enter the (primary) telephone number.
6. Select the next field.
7. Select the type of number entered (general, work, mobile, home).
8. If you have another number for this contact, repeat Steps 5 - 7. You can add up
to two additional numbers for this ontact.
9. Press Save or OK.
20 Avaya one-X™ Deskphone Edition for 9630 IP Telephone User Guide
enter until the letter or number is displayed.
key.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle
of the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
>
Abc to change between upper and lower case letters or to
enter numbers.
f. Press ABC again to cycle through the options (Abc/123/abc/ABC) until the
type you want to use is displayed.
>
Symbols to enter characters that are not on your dialpad.
i. Press OK to select the symbol.
j. Press Clear to delete all text and start over.
list.
Друкувати сторінку