KitchenAid KHHC2090SBL2 Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Мікрохвильова піч KitchenAid KHHC2090SBL2. KitchenAid KHHC2090SBL2 12 сторінок. Microwave hood combination

Друкувати сторінку

Wall Venting Installation

Only

To Remove Wall Damper Vent Cover:

1. Locate the wall damper vent cover on the back of the

microwave oven.

2. Using diagonal wire cutting pliers, gently snip out the damper

vent cover at the perforations.

A. Diagonal wire cutting pliers

B. Back of microwave

oven

C. Wall damper vent cover

D. Perforations

Save the cover for possible change of venting method in the

future.

Position the damper assembly so that the long tab slides into

the slot on the right side of the damper vent opening, as

shown. Then secure with mounting screw.

Roof Venting Installation

Only

To Remove

Roof Damper Vent Cover:

1. Locate the roof damper vent cover on the top of the

microwave oven.

2. Using diagonal wire cutting pliers, gently snip out the damper

vent cover at the perforations.

A. Diagonal wire cutting priers

B. Top of microwave oven

C. Roof damper vent cover

D. Perforations

3. Save the cover for possible change of venting method in the

future.

NOTE: Do not install damper assembly at this time.

A. Mounting screw

B. Damper assembly

C. Long tab (inside slot)