Avaya B179 Посібник з конфігурації - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з конфігурації для Телефон Avaya B179. Avaya B179 12 сторінок. Configuring b100 series phones on ip office
Також для Avaya B179: Короткий довідник (4 сторінок), Короткий довідник (4 сторінок), Посібник з швидкого налаштування (4 сторінок), Посібник з конфігурації (2 сторінок)

5. Configuration of the Avaya Aura® Communication

Manager

Basic configuration of Communication manager is outside the scope of this document. A station

to support the B179 SIP Conference Phone is created in Communication Manager automatically

when using System Manager to add a User in Session Manager, as described in Section 4.

If the native conference feature of the B179 SIP Conference phone is to be used, it's necessary

that the station in Communication Manager have at least 4 call appearances, as each call initiated

by the B179 SIP Conference Phone will use a call apperance. This was manually done via the

SAT interface in Communication Manager, using the "change station 36052" command, as

shown in Figure 10. For additional information on configuring Configuration Manager, see

references [4] and [5]. System Manager can also be used to add/change an endpoint's button

assignments.

6. Observations

At this time, for full feature functionality, it is recommended that multiple codecs be configured

using the priority value to determine the preference. At a minimum one of the G.711 codecs must

be selected. This may not be required in future releases.

UDP cannot be used as the SIP signaling transport protocol if VLAN tagging is used.

For full functionality with the conference feature, native to the B179 SIP Conference Phone, the

station should be administered in Communication Manager with at least 4 call appearances.

JPA; Reviewed:

SPOC 07/08/2011

Figure 10: Change Station

Solution & Interoperability Test Lab Application Notes

10 of 12

B179SIPCMSM