Gardena SR 1600 7946 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Газонна та садова техніка Gardena SR 1600 7946. Gardena SR 1600 7946 11 сторінок. Pond silt remover

Друкувати сторінку

1. Operation

8. Troubleshooting

Problem

The Pond Silt Remover

sucks nothing up

Reduced suction power

The Pond Silt Remover

does not empty

CAUTION !

If other faults occur, please contact GARDENA Service.

9. Technical data

Mains voltage / mains frequency 230 V AC / 50 Hz

Rated power

Connection cable

Max. delivery capacity

Filter tray volume

Suction hose length

Discharge hose length

Max. particle size for suction

Liquid temperature

Noise level

according to 98 / 37/ EC

DANGER ! Electric shock !

V Disconnect the Pond Silt Remover at the mains before

rectifying any faults.

Probable Cause

Discharge hose wrongly fitted.

Pond Silt Remover too high

above the surface of the water.

Foam filter, suction tube, suction

hose or fine filter bag dirty.

The filter bag is full.

Discharge hose kinked or laid

without a falling gradient.

Filter tray and discharge hose

dirty.

Work on the electrical parts must only be carried out by

GARDENA Service.

SR 1600 (Art. 7946)

1400 W

4 m H05-VV

1600 l / h

Approx. 27 l

4 m

2 m

20 mm

4 °C - 35 °C

< 85 dB (A)

Remedy

v The non-return flap in the

discharge hose should not

be plugged into the filter tray

and must be at the outlet

from the discharge hose.

v Position the Pond Silt

Remover max. 0.5 m

above the surface of

the water.

v Clean the Pond Silt Remover

(see 7.Maintenance).

v Replace filter bag.

v Lay the discharge hose so

that it is not kinked and has

a slightly falling gradient.

v Clean filter tray and

discharge hose.