Avaya BCM50 Посібник з конфігурації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Телефон Avaya BCM50. Avaya BCM50 14 сторінок. Business communication manager for skype sip connect service
Також для Avaya BCM50: Посібник з технічної конфігурації (18 сторінок)
Друкувати сторінку
•
Set the Destination Digits to the value provide as the External Number in Step 10 of
section 5.2.2
•
In the ITSP Account drop down list, select the Skype account
9. Click OK
5.2.4 Configuring Incoming Calls from SKYPE to BCM
This can be done in one of two ways;
1.
The DID assigned to the BCM can be associated with a target line assigned to a group of
set(s) and all calls to the DID will be routed those set(s).
All calls to the DID assigned to the BCM can be answered by the Auto Attendant (AA) and
2.
from there, a DN can be entered to reach a phone on the BCM
5.2.4.1 Assigning DID to BCM Phones for Incoming Call
1. Navigate to
target line
2. On the selected Target Line, set the "Pub. Received #" to the last 4-digis of the Skype
assigned DID.
3. Assign the DN of phones on the BCM that require an appearance on this target line. This
will be the phones that will be alerted when call to the Skype assign DID is received.
a. Navigate to Configuration
Target Line configured in Step 2 above
b. Click on the Assigned DNs tab
Click the Add button to add the DN of set(s) to this Target Line
c.
5.2.4.2 Configuring AA to Answer Incoming Calls
Alternatively, the AA on the BCM can be configured to answer incoming calls and then call
routed to a target phone on the BCM by entering the extension of the set at the AA prompt. To
do this,
1. Navigate to Configuration
target line
2. On the selected Target Line, set the "Pub. Received #" to the last 4-digis of the Skype
assigned DID.
3. Navigate to Configuration
NC; Reviewed:
10/01/2010
Configuration
Telephony
Telephony
Application
Avaya BCM Solutions Test Lab
Application Notes
©2010 Avaya Inc. All Rights
Reserved.
Lines
Target Line and click on an unused
Telephony
Lines
Lines
Target Line and click on an unused
Voice Messaging/Contact Center
ConfiguringSIPTrunkingSkype-BCM6
Target Line and click on the
.
12 of 14
Page 12 of 14