Gardena 1255 Інструкція з експлуатації Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Система зрошення Gardena 1255. Gardena 1255 8 сторінок. Valve box
Також для Gardena 1255: Посібник оператора (8 сторінок), Посібник оператора (11 сторінок), Інструкція з експлуатації Посібник з експлуатації (9 сторінок)
Assemble the Irrigation Valve
9 V / 24 V (Art. 1251 / 1278) :
D
9
0
8
C
B
Connecting Watering
Valves 24 V (Art. 1278) :
Art. 1280
E
Art. 1280
E
Locking the box lid :
I
J
10
Attention ! Flow direction !
A
V Pay attention to the flow direction (arrows) when
assembling the Irrigation Valve
1. Push the long telescopic pipe
on the outlet-side
2. Screw the short telescopic pipe
Irrigation Valve
the flow direction.
3. Push the Watering Valve with the short telescopic pipe
the distributor output
4. Screw the long telescopic pipe
Irrigation Valve
5. Insert the securing clip
0
puts
and the connections
The telescopic pipes
7
When you open the box lid
marked by the arrows on the Irrigation Valve
You can connect up to 12 Watering Valves Art. 1278 (24 V) to the
Watering Controller 4040 Art. 1276 using the Connection Cable Art.
1280 in combination with the expansion module 2040 Art. 1277.
1. Guide the connection cable
and attach to the terminal strip
the watering controller (refer to colour of cable).
2. Screw one cable from each valve into the connections C.
3. Screw the other cable from
each valve into the connec-
tions 1– 6 according to the
routing of the cables.
4. If you are using 2 Valve
Boxes of model V3, connect
the second Valve Box V3 to
the first Valve Box V3 using
the connection cable.
5. Push the protective cap
both screws
Please refer to the operating instructions for the Programming
Unit Art. 1242 for instructions on how to connect the Watering
Valves Art. 1251 (9V) to the Controllers Art. 1250.
v Lock the box lid
then protected when the lawn is mowed.
D
D
The box lid
v Overlap the holes
a small padlock or locking chain.
– or –
Alternatively, you can protect the lid
metal screw (4.2 x 19 mm).
B
all the way into the nipple
7
.
8
C
. The arrows on the Irrigation Valve point in
0
.
B
into the outlet-side of the
C
.
9
into the holes of the distributor out-
7
.
8
B
/
are fixed in place.
D
you can see the flow direction
E
into the side of the Valve Box V3
F
according to the outputs of
H
G
G
over the terminal strip
H
.
D
by turning the closing lever
can be locked to protect it against theft.
J
in the Valve Box and box lid and lock using
C
.
into the inlet side of the
8
C
.
F
and tighten
I
90°. The lid is
D
against theft using a
into
H
F