Makita 6013B Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Дриль. Makita 6013B. Makita 6013B 8 сторінок. 13 mm (1/2")
Також для Makita 6013B: Інструкція з експлуатації (8 сторінок), Інструкція з експлуатації (6 сторінок), Інструкція з експлуатації (20 сторінок)

Drilling in wood

In drilling holes in wood using

wood drill with

guide screw, there

no need to bear

down on the tool. The guide screw makes it bore naturally

itself.

In general, use a cutting lubricant when drilling metal. (But not with iron or brass).

Drilling in metal

Switch action

"Model 60138:

To start the tool, simply pull the trigger.

Release the trigger to stop. For continu-

ous operation without having to keep

your finger on the trigger, just pull the

trigger and then push in the lock button

with your thumb. To stop the tool from

the lock position, simply pull the trigger

again and release

it.

*Model 601 3BR,

The switch

i s

reversible, providing either

clockwise or counterclockwise rotation.

Pulling the lower part of the trigger puts

the wrench on in the clockwise direction.

Pulling the upper part of the trigger puts

the tool on in the counterclockwise direc-

tion. Simply releasing either end

the

trigger turns the tool off.

Warning: It

i s

dangerous and injurious to the tool to reverse the rotation by rapid

switching without waiting for the motor to stop. Put the tool off, then wait

for complete stop before switching direction of rotation.

MAINTENANCE

Carbon brushes

Replace carbon brushes when they wear

down to about 5 mm (3/16") or sparking

will occur.

Both brushes should

changed at the same time.