Gardena 8816 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Електроінструмент Gardena 8816. Gardena 8816 11 сторінок. Edging accu shears /accu shrub shears

Друкувати сторінку

8. Troubleshooting

WARNING !

Risk of Injury !

Replacing the Cutting

Blades :

Changing the Accus :

Blades can cause serious injury.

v v Do not push the safety lock of the Accu-shears forwards

when rectifying faults.

If the Accu Shears do not cut cleanly even after thorough cleaning,

the cutting blades are defective and must be replaced with new

ones.

Please only use original GARDENA Accu Shears Cutting

Blades :

Lawn shears blade set

with blade protection

Shrub shears blade set

with blade protection

1. Press both catches

all the way forwards.

2. Open the runner

3. Clean the area around the gears and coat the gear wheels with

acid-free grease (Vaseline).

4. Push connecting link (ring)

the lower blade

5. Insert the blade set

6. Push the runner

engage again.

If the sliding shoe

cam wheel

Risk of short circuit, Risk of fire.

v v The contacts of the accu must not touch metallic parts.

1. Loosen screw

2. Remove cover

3. Remove accus

4. Pull cable receptacles

5. Install new accus in reverse order.

With all other malfunctions, please contact one of the GARDENA

service centres or a dealer authorised by GARDENA.

Repairs must only be performed by specialists authorised by

GARDENA.

simultaneously and push the runner

and remove the blade set

into the middle (the hole around

must be visible).

and close the runner

all the way back until both catches

cannot be closed, check the position of the

and the connecting link

off accu pack.

Accu 45

Art. No. 2345

Accu 45

Art. No. 5378