Gardena 9852-33 Посібник оператора - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник оператора для Електроінструмент Gardena 9852-33. Gardena 9852-33 16 сторінок. Grass shear/shrub shear
Також для Gardena 9852-33: Інструкція з експлуатації (11 сторінок), Посібник оператора (15 сторінок), Посібник оператора (15 сторінок), Посібник оператора (16 сторінок), Посібник оператора (14 сторінок)
Друкувати сторінку
6. TROUBLESHOOTING
Before you do trouble-
shooting:
2
2
1
To change the grass shear
blade:
2
w
q
0
9
To change the shrub shear
blade:
2
e
w
q
0
9
20
WARNING! Risk of physical injury!
Cut injury when the product starts accidentally.
v S lide the protective cover
do troubleshooting.
1
Only an original GARDENA grass shear blade is allowed to be
used. A new blade can be ordered by the GARDENA Service.
1. Push the button
2. Remove the blade
3. If necessary clean the transmission chamber and lubricate the
excentric drive
4. Turn the excentric drive
5. Pull the crank
6. Place the new blade
excentric drive
7. Slide the lid
Only an original GARDENA shrub shear blade is allowed to be
used. A new blade can be ordered by the GARDENA Service.
1. Push the button
2. Remove the blade
3. If necessary clean the transmission chamber and lubricate the
excentric drive
4. Turn the excentric drive
5. Pull the crank
6. Slide the ring
7. Place the new blade
excentric drive
8. Slide the lid
(1)
over the blade
9
and slide the lid
(2)
.
q
with some acid-free grease (Vaseline).
q
downwards.
w
on the back side of the blade
(2)
on the motor unit in such a way that the
q
is inserted in the crank
0
upwards until it makes a click.
9
and slide the lid
(2)
.
q
with some acid-free grease (Vaseline).
q
downwards.
w
on the back side of the blade
e
in the middle of the crank
(2)
on the motor unit in such a way that the
q
is inserted in the ring
0
upwards until it makes a click.
(2)
before you
0
downwards.
(2)
in the middle.
w
.
0
downwards.
(2)
downwards.
w
.
e
of the crank
w
.