Gardena Accu 60 Інструкція з експлуатації Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Електроінструмент Gardena Accu 60. Gardena Accu 60 12 сторінок. Accu edging shears / accu shrub shears
Також для Gardena Accu 60: Інструкція з експлуатації Посібник з експлуатації (11 сторінок), Інструкція з експлуатації Посібник з експлуатації (13 сторінок)
Друкувати сторінку
6. Putting into Storage
Storage / Overwintering :
Disposal :
(in accordance with
RL2002 / 96 / EC)
Disposal of
batteries :
7. Maintenance
DANGER !
Risk of Injury !
WARNING !
Personal Injury and
Damage to Property !
Sharpening the Blades :
C
D
Store your Accu Shears out of the reach of children.
1. Clean the Accu Shears and oil the blades
(See 7. Maintenance).
2. Cover the blades with sheath for storage.
3. Charging the battery (see 4. Initial Operation).
4. Store Shears in a cool, dry place where they are protected
from frost.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
The GARDENA Accu Shears contains lithium-ion cells that should
not be discarded with normal household waste at the end of their
life.
Li-ion
Please return the lithium-ion cells to your GARDENA dealer or
dispose of them properly at a public recycling centre.
1. Discharge lithium-ion cells completely.
2. Dispose of lithium-ion cells properly.
Blades can cause injury.
v v Do not push the safety lock of the Accu Shears forwards
during maintenance work.
There is a risk of personal injury and damage to the Shears
if you clean them under running water (especially under
high pressure).
v v Never clean your Shears under running water.
To obtain good cutting results, the blades should be cleaned
thoroughly from time to time and should always be sharp.
Always remove notches and burrs caused by stones etc.
immediately.
1. Remove the blades (see 8. Troubleshooting, "Replacing
Cutting Blades" ).
2. Separate the upper blade
3. Remove any grass and dirt between the upper and lower
blades.
4. Sharpen the blades using a sharpening stone.
5. Fit the blades (see 8. Troubleshooting, "Replacing Cutting
Blades" ).
C
D
and lower blade
.
15