Alien Aircraft Corp Hornet K-107 Інструкція з монтажу Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Іграшка Alien Aircraft Corp Hornet K-107. Alien Aircraft Corp Hornet K-107 17 сторінок.
Друкувати сторінку
36...Use two of the 1/32" x 1 1/2" sheets to sheet the center of the
wing. The sheet should be cut to fit between the spars as shown on
the plan.
37...Glue W-10 into position to the spar and rib W-3.
38...Remove the wing from the plan. Cut off the rib support tabs from
the ribs.
39...Glue the bottom stringer spars into position. Use two of the 1/32"
x 1 1/2" sheets to sheet the center of the wing. The sheet should be
cut to fit between the spars as shown on the plan.
40...Trim the spars, leading edge and trailing edge flush with each end
of the wing.
Page 11