A&L Furniture 44 Square Walk-in Table Інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень A&L Furniture 44 Square Walk-in Table. A&L Furniture 44 Square Walk-in Table 3 сторінки.

Друкувати сторінку

A&L Furniture 44 Square Walk-in Table Інструкція з монтажу

PARTS

(included)

Table Top (2)

2"x2"x35" Strips (2)

Table Leg Assemblies (2)

Bench Tops (4)

1"x5½"x14½" Bench Leg Supports (8)

1"x5½"x32" Bench Bottoms (4)

STEP 1

Lay the table tops upside down & bolt together. Insert the four 2¾" bolts in the predrilled holes in one side

& turn into the threaded inserts with the Allen Wrench. (See photo 1.) Now, attach the 2"x2"x35" strips, use

six 2" screws in each strip. Turn into the predrilled holes and screw down into the table top. (See photo 2.)

STEP 2

Assemble the 4 bench legs. Take two leg supports and attach to a bench bottom. Put two 2" screws in the

predrilled holes in each end of the bench bottom and screw into one end of the leg supports. (See photo 3.)

Predrilled

holes in leg

supports

belong at

this end

STEP 3

Unfold a table leg assembly & place upside down on a table. (See photo 4.) Take a bench top & place

upside down with the center 2x2 between the 2x4 table leg support beams. Attach with two 2" screws on

each side. (See photos 4 and 5.)

photo 1

photo 3

HARDWARE

2¾" Wafer Head Bolts (4)

2" Screws (75)

Allen Wrench (1)

Square Drive Bit (1)

TOOLS NEEDED

Power drill or screwdriver

photo 4

*Keep 2x2 even with leg supports*

(included)

photo 2

photo 5