AlienPro RG STAR Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Ді-джейське обладнання AlienPro RG STAR. AlienPro RG STAR 3 сторінки.

Technical Specifications
1. Power Supply: AC 110 - 240V
2. Rated Power: 30W
3. Laser Power: Green 50mw/532nm; Red 150mw/650nm
4. Working Mode: Sound - Active / Auto - Play / DMX512 / Master - Slave
5. Control Signal: DMX512 Signal
6. DMX Control Channels: 8 Channels
7. Scanner System: Step Motor
8. Operating Temperature: -1° -35°
9. Storage Temperature: -10° -60°
10. Warm - Up Time: <15min
11. Laser Classification: 3b
12. Modulation: TLL
13. Net Weight: 3.6 Kg
14. Gross Weight: 4.3 Kg
15. Packing Size: 43 x 25 x 17cm
Declaration
This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instruc-
tions and warning notes written in this user manual. We cannot be made liable for damges caused
bye incorrect installations and unskilled operation.
Waranty Card
This product is made of high-brightness transistor. We will provide 1 year
warranty under the condition that user has operated the light normally and
lifetime service. We won't provide warranty if the damage is caused by
artificial or force majeure event. Cost of fittings should be charged by user if
product need maintenance after 1 year .Please cut this warranty card and
shipped it along with the product to our factory when applying for warranty.
Product:
Purchasing date:
Warranty date: From
User's name:
Company:
w w w . a l i e n p r o . c o m . m x
Code of invoice:
To
Add:
Tel:
4
Foreword
Thanks for using our LED Stage Lighting Equipment. Before using, please read the instruction
carefully. The instruction include important installing and using information. Please use the fixtures
following the instruction and keep the user manual properly.
Introduction
Thank you for purchasing this product. To optimize the performance of this product, prior to use,
please read these operating instructions carefull to get yourself familiar with the basic operation of
this unit. Please keep the manual in safe price for future reference.
This unit has been tested at our factory before being shipped to you, there is no assembly required.
Once after received this product, please take and put carefully. And check cautiosly that whether the
products was damaged or not durind the transportation.
Checking Parts
Please check if the following parts are included:
1 x Laser Light
1 x Power Cable
1 x User Manual
Danger
¡Danger Laser Radiation!
Avoid direct eye exposure!
Laser radiation can cause eye damage or skin damage
All protective measures for a safe operation of this laser must be applied.
Installation
1. Please check the voltage whether is the same with the one showed on the equipment or not.
2. It must ask for the technical person and set the light safety when installation. And let the light
beam at the suitable angel.
3. When install this equipment please make sure there´s no flammable surfaces (decorated things,
etc) with in at least 2.5M and maintain minimum distance of 0.5M from the equipment to the walls.
4. Please make sure that there´s no other equipment or decorating materials obstructed the exhaust
fan and the vent-pipe.
5. Products should be install inmobility.
6. In case of safety, it´s very important that to connect the earth with line.
Attention
1. Please do not open the bottom cover yourself without permission. Operate it accord the user
manual. Call the technician when the machine breaks down.
w w w . a l i e n p r o . c o m . m x
1