AlienTek T100 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Паяльний пістолет AlienTek T100. AlienTek T100 16 сторінок. Smart soldering station

AlienTek T100 Посібник користувача
ALIENTEK
voltage is low as shown in Figure 5.1. The default is 19.8V, which is 6S lithium battery pack ×
3.3V. Usually, the lithium battery is basically less than 3.3V. This parameter can be adjusted
(10~26V), and user can adjust the value according to battery.
Output current: range: 0.1~1.5A (default 1A). When AC power is used and the battery is
connected, this value is the current that charges the battery.
Output Enable: Turns charging on or off.
Note: The output voltage is 25.2V, only supports 6-cell lithium battery pack charging!

6.9 Language

The system supports three languages: Simplified Chinese, English, and Traditional Chinese.

6.10 Version information

Version information: The firmware version of the current soldering station.

6.11 Factory reset

Factory reset: Restores most of the setup parameters to factory values, but does not include
language selection.
T100 Smart Soldering station
Fig 6.10 battery low
Fig 6.11 language
Fig 6.12 version information
Fig 6.13 factory reset
10
User Manual