A&S Studio Bar 200 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Акустична система A&S Studio Bar 200. A&S Studio Bar 200 16 сторінок. 2.1 bar with built-in subwoofer 200

Друкувати сторінку

Adjust the Volume

Press the VOL +/– buttons on the unit or on the remote control to adjust the volume.

•

If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE

button again or press the VOL +/- buttons to resume normal listening.

Select equaliser (EQ) effect

While playing, press the FLAT, CINEMA, SONG buttons on the remote control to select preset

equalisers.

AUX/LINE IN/OPTICAL/COAXIAL/HDMI ARC Operation

1 Ensure that the unit is connected to the TV or audio device.

2 While in ON mode, press the

OPTICAL, COAXIAL, HDMI ARC button on the remote control to select the desired mode.

3 Operate your audio device directly for playback features.

4 Press the VOL +/– button to adjust the volume to your desired level.

Tip: While in OPTICAL/COAXIAL/HDMI ARC mode, if there's no sound output from the unit, you

•

may need to activate PCM Signal output on your source device (eg. TV, DVD or Blu-ray player).

Bluetooth Operation

You can listen to tracks from a media device if connected to the unit via Bluetooth.

Pair Bluetooth-enabled Devices

The first time you connect your bluetooth device to this player, you need to pair your device to this

player.

Note:

- The operational range between this player and a Bluetooth device is approximately 8 meters

(without any object between the Bluetooth device and the unit).

- Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.

- Compatibility with all Bluetooth devices is not guaranteed.

- Any obstacle between this unit and a Bluetooth device can reduce the operational range.

- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 Press the

button on the unit repeatedly or press the BT button on the remote control to

select Bluetooth mode. Display panel shows "bt" , then shows "No bt" to enter pairing mode (if

there's no Bluetooth device connected).

2 Activate your Bluetooth device and select the search mode. "A&S Bar 200" will appear on your

Bluetooth device list.

If you cannot find the soundbar, press and hold the

be searchable. After the "Pairing" voice prompt.

3 Select "A&S Bar 200" in the pairing list. After the "Paired" voice prompt, the system is successfully

connected and the display panel shows "bt" .

4 Play music from the connected device.

button on the main unit repeatedly or the AUX, LINE IN,

/PAIR button on the remote control to