Align APS030-2200 Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Промислове обладнання Align APS030-2200. Align APS030-2200 14 сторінок. 100,000 lbs. capacity battery powered tugger
Друкувати сторінкуPTT6 Power Tugger
8
IV. Sequence of Operations
As operator, you are responsible that no one is in harm's way whilst you are
operating the transporter.
Connecting the PTT6 to a Trailer
Ensure the coupling between the PTT6 and the trailer is properly connected.
When the lift is performed, do not lift higher than necessary as it puts additional strain on the
lift cylinder.
The casters at the back of the PTT6 will lift from 1.5" from the floor. This applies the load to the drive
wheel for easy maneuverability.
The coupling must be attached vertically so the casters in the back of the PTT6 are in the air when it
has been connected to the trailer.
If the trailer is fixed to the PTT6, the casters can be removed to avoid becoming stuck on
uneven floors.
Connecting the PTT6 to a Trailer
The direction and speed of the PTT6 is controlled and adjusted by the accelerator at the top of the
handle.
A safety switch is located on the handle. When triggered, the PTT6 will stop and take a small leap
forward to prevent the pinning of the operator.