Garmin TACX NEO BIKE PLUS Посібник користувача - Сторінка 32

Переглянути онлайн або завантажити pdf Посібник користувача для GPS Garmin TACX NEO BIKE PLUS. Garmin TACX NEO BIKE PLUS 34 сторінки.

Tightening the Handles and Screws

To avoid personal injury and damaging the trainer, firmly tighten all of the handle bolts or set screws before

each use.

1 Confirm the bike geometry, and select an option:

• For the handle bolts, firmly tighten each handle by hand.

• For the set screws, firmly tighten each screw using the 6 mm or 8 mm hex keys.

2 For the handles, pull and turn the handle only (the bolt doesn't move), and align it to the frame or rail.

The handle itself has a spring mechanism that can be snapped into alignment with the bike so it doesn't

stick out or get in the way.

3 Make sure the handle snaps back into place.

Your trainer can be used with wireless ANT+ sensors such as a heart rate monitor. Bluetooth sensor should be

paired directly to the Tacx Training app.

1 Bring the sensor within 3 m (10 ft.) of your trainer.

NOTE: Stay 10 m (33 ft.) away from other sensors while pairing.

2 Open the Tacx Training app.

The sensor appears in the connections list, and the sensor data appears on the trainer and app data fields.

CAUTION

Troubleshooting