Garmin Zumo XT Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для GPS Garmin Zumo XT. Garmin Zumo XT 49 сторінок.
Також для Garmin Zumo XT: Посібник із швидкого старту (8 сторінок), Інструкція з монтажу Посібник з монтажу (46 сторінок)
Друкувати сторінку
Speeding alert: The device plays a tone and displays a red
border on the speed limit icon when you exceed the posted
speed limit for the current road.
Railroad crossing: The device plays a tone and displays the
distance to an upcoming railroad crossing.
Animal crossing: The device plays a tone and displays the
distance to an upcoming animal crossing area.
Curve: The device plays a tone and displays the distance to a
curve in the road.
Slower traffic: The device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature.
Break planning: The device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
Enabling or Disabling Rider Alerts
You can turn off individual audible rider alerts. Visual alerts
appear even when the audible alert is disabled.
1
Select Settings > Driver Assistance > Rider Alerts.
2
Select or clear the check box next to each alert.
Red Light and Speed Cameras
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
• In some areas, your device can receive live red light and
speed camera data while connected to a smartphone running
the Garmin Drive app.
• You can use the Garmin Express
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Incident Detection and Notifications
The device allows you to send your location to an emergency
contact. This is a supplemental feature and should not be relied
upon as a primary method to obtain emergency assistance. The
Garmin Drive app does not contact emergency services on your
behalf.
Your zūmo device uses built-in sensors to detect a possible
vehicle incident.
• If you set up an incident contact, the device can send an
automated text message to that contact when it detects an
incident and your vehicle stops moving. This can help alert
the contact to your situation if you are not able to call or send
a message. This feature requires a connection to the Garmin
Drive app and an active mobile data connection to send a
message.
• If you have not set up an incident contact, the device
automatically displays the nearest address or geographic
coordinates when it detects an incident. This feature is
helpful if you need to tell emergency personnel your location.
• If you have an inReach
device, you can manually send an SOS when it detects an
incident.
4
NOTICE
™
software
(garmin.com
WARNING
®
device connected to your zūmo
Setting Up an Incident Contact
Before you can set up an incident detection contact, you must
complete these tasks:
• Connect your device to Garmin Drive
and Headset, page
13).
• Select Settings > Wireless Networks, and verify the Phone
calls option is enabled for your phone.
The device must have access to the Garmin Drive app and to
your smartphone phone book during the incident contact setup.
If you do not want to use your device for hands-free calling, you
can disable the Phone calls option after the incident contact
setup is complete.
1
Select Settings > Driver Assistance > Incident
Notification > Continue.
A list of your smartphone contacts appears.
2
Select a contact, and select Next.
3
Verify the contact's phone number, and select Next.
4
Enter your name or nickname, and select Done.
5
Review the sample incident message, and select Next.
6
Follow the on-screen instructions to inform your contact that
you have added them as an incident contact.
NOTE: The incident notification message includes the name
or nickname you entered, but it is not sent from your phone
number. The message is sent using a third-party service, and
you should inform your incident contact that the incident
message will come from an unknown number.
7
Select OK.
8
Review the information, and select Save.
Cancelling an Incident Notification
When the device detects an incident, a message and a voice
prompt inform you that a notification will be sent to your incident
contact. A 60-second countdown timer starts when the incident
is detected, and the device sends the notification automatically
when the timer expires. If you do not want to send the
notification, you can cancel it.
Before the timer expires, select Cancel.
Disabling Incident Notifications
While incident notifications are disabled, the device does not
send an SMS notification when it detects an incident.
1
Select Settings > Driver Assistance > Incident
Notification.
2
Clear the Incident Detection SMS check box.
inReach Remote
The inReach remote function allows you to control your inReach
satellite communication device (sold separately) using your
zūmo device. You can send messages, view weather reports,
trigger an SOS alert, and more. Go to
purchase an inReach device.
Connecting an inReach Device
1
Bring the inReach device within 3 m (10 ft.) of your zūmo
device.
2
On your zūmo device, select Apps > inReach.
3
Follow the on-screen instructions on your zūmo device to
complete the pairing process.
After the pairing process is complete, the inReach and zūmo
devices connect automatically when they are within range.
Sending an inReach Message
Before you can send an inReach message using your zūmo
device, you must pair it with a compatible inReach device
(Connecting an inReach Device, page
(Pairing Your Phone
buy.garmin.com
to
4).
Rider Awareness Features and Alerts