Garmin D2 AIR X10 Посібник користувача - Сторінка 40
Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Garmin D2 AIR X10. Garmin D2 AIR X10 48 сторінок.
Друкувати сторінку
Device Care
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the
touchscreen, or damage may result.
Avoid chemical cleaners, solvents, and insect repellents
that can damage plastic components and finishes.
Thoroughly rinse the device with fresh water after
exposure to chlorine, salt water, sunscreen, cosmetics,
alcohol, or other harsh chemicals. Prolonged exposure to
these substances can damage the case.
Keep the leather band clean and dry. Avoid swimming or
showering with the leather band. Exposure to water or
sweat can damage or discolor the leather band. Use
silicone bands as an alternative.
Do not store the device where prolonged exposure to
extreme temperatures can occur, because it can cause
permanent damage.
Cleaning the Watch
Some users may experience skin irritation after prolonged
use of the watch, especially if the user has sensitive skin
or allergies. If you notice any skin irritation, remove the
watch and give your skin time to heal. To help prevent skin
irritation, ensure the watch is clean and dry, and do not
overtighten the watch on your wrist.
Even small amounts of sweat or moisture can cause
corrosion of the electrical contacts when connected to a
charger. Corrosion can prevent charging and data
transfer.
1 Wipe the watch using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the watch to dry completely.
TIP: For more information, go to
/fitandcare.
34
NOTICE
CAUTION
NOTICE
www.garmin.com
Changing the Bands
The watch is compatible with 20 mm wide, standard,
quick-release bands.
1 Slide the quick-release pin on the spring bar to remove
the band.
2 Insert one side of the spring bar for the new band into
the watch.
3 Slide the quick-release pin, and align the spring bar
with the opposite side of the watch.
4 Repeat steps 1 through 3 to change the other band.
Troubleshooting
Is my phone compatible with my watch?
The D2 Air X10 watch is compatible with phones using
Bluetooth technology.
Go to
garmin.com/pilotapp
information.
Go to
garmin.com/voicefunctionality
functionality compatibility information.
My phone will not connect to the watch
If your phone will not connect to the watch, you can try
these tips.
• Turn off your phone and your watch, and turn them
back on again.
• Enable Bluetooth technology on your phone.
• Update the Garmin Connect app to the latest version.
• Remove your watch from the Garmin Connect app and
the Bluetooth settings on your phone to retry the pairing
process.
• If you bought a new phone, remove your watch from the
Garmin Connect app on the phone you intend to stop
using.
• Bring your phone within 10 m (33 ft.) of the watch.
• On your phone, open the Garmin Connect app, select
or
, and select Garmin Devices > Add Device to
enter pairing mode.
• From the watch face, hold
Pair Phone.
My headphones will not connect to the watch
If your headphones were previously connected to your
phone using Bluetooth technology, they may connect to
your phone before connecting to your watch. You can try
these tips.
• Turn off Bluetooth technology on your phone.
for Bluetooth compatibility
for voice
, and select
> Phone >
Troubleshooting