Garmin D2 Bravo Посібник користувача - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Garmin D2 Bravo. Garmin D2 Bravo 28 сторінок.
Також для Garmin D2 Bravo: Посібник користувача (36 сторінок)

Друкувати сторінку

GLONASS: The default satellite system option is GPS. You can

enable the GLONASS option for increased performance in

challenging environments and faster position acquisition.

Using the GPS and GLONASS options can reduce battery

life more than using the GPS option only.

Pos. Format: Sets the geographical position format and datum

options.

Format: Sets general format preferences, such as the pace and

speed shown during activities, and the start of the week.

Data Recording: Sets how the device records activity data. The

Smart recording option (default) allows for longer activity

recordings. The Every Second recording option provides

more detailed activity recordings, but may not record entire

activities that last for longer periods of time.

USB Mode: Sets the device to use mass storage mode or

Garmin mode when connected to a computer.

Restore Defaults: Allows you to reset user data and settings

(Restoring All Default Settings, page

Software Update: Uses a Wi‑Fi connection to check for

software updates to the device.

About: Displays device, software, and license information.

Changing the Units of Measure

You can customize units of measure for distance, pace and

speed, elevation, weight, height, and temperature.

Hold UP.

Select Settings > System > Units.

Select a measurement type.

Select a unit of measure.

Time Settings

Hold UP, and select Settings > System > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Set Time: Sets the time zone for the device. The Auto option

sets the time zone automatically based on your GPS position.

Time: Allows you to adjust the time if it is set to the Manual

option.

Backlight Settings

Hold UP, and select Settings > System > Backlight.

Mode: Sets the backlight to turn on manually or for keys and

alerts.

Timeout: Sets the length of time before the backlight turns off.

Brightness: Sets the brighness level of the backlight.

ANT+ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor, such as HRM-Run

Rate Monitor, page

17)

• Bike speed and cadence sensor

Cadence Sensor, page

• Foot pod

(Foot Pod, page

• Power sensor, such as Vector

• tempe

™

wireless temperature sensor

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing ANT+ Sensors

The first time you connect a sensor to your device using ANT+

wireless technology, you must pair the device and sensor. After

they are paired, the device connects to the sensor automatically

ANT+ Sensors

20).

(Putting On the Heart

(Using an Optional Bike

18)

™

(tempe, page

when you start an activity and the sensor is active and within

range.

NOTE: If a heart rate monitor was bundled with your device, the

included heart rate monitor is already paired with your device.

If you are pairing a heart rate monitor, put on the heart rate

monitor

(Putting On the Heart Rate Monitor, page

The heart rate monitor does not send or receive data until

you put it on.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors

while pairing.

Hold UP.

Select Settings > Sensors > Add New.

Select an option:

• Select Search All.

• Select your sensor type.

After the sensor is paired with your device, the sensor status

changes from Searching to Connected. Sensor data appears

in the data page loop or a custom data field.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this

task.

You should wear the heart rate monitor directly on your skin, just

below your sternum. It should be snug enough to stay in place

during your activity.

Snap the heart rate monitor module

The Garmin logos on the module and the strap should be

right-side up.

Wet the electrodes

of the strap to create a strong connection between your chest

and the transmitter.

Wrap the strap around your chest, and connect the strap

hook

to the loop

NOTE: The care tag should not fold over.

The Garmin logos should be right-side up.

18)

Bring the device within 3 m (10 ft.) of the heart rate monitor.

After you put on the heart rate monitor, it is active and sending

data.

TIP: If the heart rate data is erratic or does not appear, see the

troubleshooting tips

page

18).

onto the strap.

and the contact patches

(Tips for Erratic Heart Rate Data,

17).

on the back