Garmin epix Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Garmin epix. Garmin epix 28 сторінок. Touchscreen gps/glonass mapping watch
Також для Garmin epix: Посібник із швидкого старту (23 сторінок)

Друкувати сторінку
Garmin epix Посібник користувача

Getting Your VO2 Max. Estimate for Running

Before you can view your VO2 max. estimate, you must put on
the heart rate monitor and pair it with your device
Sensors). If your epix device was packaged with a heart rate
monitor, the devices are already paired. For the most accurate
estimate, complete the user profile setup
Profile), and set your maximum heart rate
Rate
Zones).
NOTE: The estimate may seem inaccurate at first. The device
requires a few runs to learn about your running performance.
1
Run for at least 10 minutes outdoors.
2
After your run, select Save.
3
Hold
.
4
Select My Stats > VO2 Max. > Running.

Getting Your VO2 Max. Estimate for Cycling

Before you can view your VO2 max. estimate, you must put on
the heart rate monitor, install the power meter, and pair them

VO2 Max. Standard Ratings

These tables include standardized classifications for VO2 max. estimates by age and gender.
Males
Percentile
Superior
95
Excellent
80
Good
60
Fair
40
Poor
0–40
Females
Percentile
Superior
95
Excellent
80
Good
60
Fair
40
Poor
0–40
Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.

Viewing Your Predicted Race Times

Before you can view your projected race times (running only),
you must put on a heart rate monitor and pair it with your device.
For the most accurate estimate, complete the user profile setup
(Setting Up Your User
Profile), and set your maximum heart rate
(Setting Your Heart Rate
Zones).
Your device uses the VO2 max. estimate
Estimates) and published data sources to provide a target race
time based on your current state of fitness. This projection also
presumes you have completed the proper training for the race.
NOTE: The projections may seem inaccurate at first. The device
requires a few runs to learn about your running performance.
1
Put on your heart rate monitor, and go for a run.
2
Hold
.
3
Select My Stats > Race Predictor.
Your projected race times appear for 5K, 10K, half marathon,
and marathon distances.

Recovery Advisor

You can use your Garmin device paired with the heart rate
monitor to display how much time remains before you are fully
recovered and ready for the next hard workout. The recovery
advisor feature includes recovery time and recovery check.
Recovery advisor technology is provided and supported by
Firstbeat Technologies Ltd.
Recovery check: The recovery check provides a real-time
indication of your state of recovery within the first several
minutes of an activity.
Training
(Pairing ANT+
(Setting Up Your User
(Setting Your Heart
20–29
30–39
55.4
54
51.1
48.3
45.4
44
41.7
40.5
<41.7
<40.5
20–29
30–39
49.6
47.4
43.9
42.4
39.5
37.8
36.1
34.4
<36.1
<34.4
(About VO2 Max.
with your epix device
(Pairing ANT+
device was packaged with a heart rate monitor, the devices are
already paired. For the most accurate estimate, complete the
user profile setup
(Setting Up Your User
maximum heart rate
(Setting Your Heart Rate
NOTE: The estimate may seem inaccurate at first. The device
requires a few rides to learn about your cycling performance.
1
Ride at a steady, high intensity for at least 20 minutes
outdoors.
2
After your ride, select Save.
3
Hold
.
4
Select My Stats > VO2 Max. > Cycling.
40–49
50–59
52.5
48.9
46.4
43.4
42.4
39.2
38.5
35.6
<38.5
<35.6
40–49
50–59
45.3
41.1
39.7
36.7
36.3
33
33
30.1
<33
<30.1
Recovery time: The recovery time appears immediately
following an activity. The time counts down until it is optimal
for you to attempt another hard workout.

Turning On the Recovery Advisor

Before you can use the recovery advisor feature, you must put
on the heart rate monitor and pair it with your device
ANT+
Sensors). If your epix was packaged with a heart rate
monitor, the devices are already paired. For the most accurate
estimate, you must complete the user profile setup
Your User
Profile), and set your maximum heart rate
Your Heart Rate
Zones).
1
Hold
.
2
Select My Stats > Recovery Advisor > Status > On.
3
Go for a run.
Within the first several minutes of your run, a recovery check
appears, showing your real-time state of recovery.
4
After your run, select Save.
The recovery time appears. The maximum time is 4 days,
and the minimum time is 6 hours.

Viewing Your Recovery Time

Before you can view your recovery time, you must enable the
recovery advisor.
1
Hold
.
2
Select My Stats > Recovery Advisor.
The recovery time appears. The maximum time is 4 days,
and the minimum time is 6 hours.
Sensors). If your epix
Profile) and set your
Zones).
60–69
70–79
45.7
42.1
39.5
36.7
35.5
32.3
32.3
29.4
<32.3
<29.4
60–69
70–79
37.8
36.7
33
30.9
30
28.1
27.5
25.9
<27.5
<25.9
(Pairing
(Setting Up
(Setting
9