Garmin fenix Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Garmin fenix. Garmin fenix 22 сторінки. Turn on smart watch of 2022 - go wiki
Також для Garmin fenix: Посібник користувача (18 сторінок), Посібник для початківців (4 сторінок), Посібник із швидкого старту (18 сторінок), Питання (5 сторінок), Як це зробити (8 сторінок)
Друкувати сторінку
• To set grid north (000º) as the heading reference, select
Grid.
• To set the magnetic variation value manually, select User,
enter the magnetic variance, and select Done.
Altimeter Settings
Select Setup > Sensors > Altimeter.
Auto Cal.: Allows the altimeter to self-calibrate each time you
turn on GPS tracking.
Baro. Plot: Variable records changes in elevation while you are
moving. Fixed assumes the device is stationary at a fixed
elevation, so the barometric pressure should only change
due to weather. Amb. Press. records ambient pressure
changes over a period of time.
Elev. Plot: Sets the device to record elevation changes over a
period of time or distance.
Calibrate: Allows you to manually calibrate the altimeter sensor.
Setting the Device Tones
You can customize tones for messages and keys.
1
Select the Orange key.
2
Select Setup > Tones.
3
Select Messages or Keys.
4
Select an option.
Display Settings
Select Setup > Display.
Backlight: Adjusts the backlight level and the length of time
before the backlight turns off.
Contrast: Adjusts the screen contrast.
Map Settings
Select Setup > Map.
Orientation: Adjusts how the map is shown on the page. North
Up shows North at the top of the page. Track Up shows your
current direction of travel toward the top of the page.
Auto Zoom: Automatically selects the appropriate zoom level
for optimal use on your map. When Off is selected, you must
zoom in or out manually.
Points: Selects the zoom level for points on the map.
Track Log: Allows you to show or hide tracks on the map.
Go To Line: Allows you to select how the course appears on
the map.
Map Colors: Allows you to select whether land or water is
highlighted on the map.
Track Settings
Select Setup > Tracks.
Method: Selects a track recording method. Auto records the
tracks at a variable rate to create an optimum representation
of your tracks. If you select Distance or Time, you can set
the interval rate manually.
Interval: Allows you to set the track log recording rate.
Recording points more frequently creates a more-detailed
track, but it fills the track log faster.
Auto Start: Sets the device to record your track automatically
when you select Start GPS.
Auto Save: Sets the device to automatically save your track
when you turn off GPS.
Auto Pause: Sets the device to stop recording your track when
you are not moving.
Output: Sets the device to save the track as a GPX, FIT, or a
GPX/FIT file
(page
13).
Customizing Your Device
• GPX records a traditional track that allows you to perform
GPS functions with the track such as navigation and
routes.
• FIT records additional information such as lap data and is
used to record a track greater than 10,000 points. FIT files
can be uploaded to Garmin Connect™ and are much
more compact than GPX files.
• GPX/FIT allows you to output both file types.
Time Settings
Select Setup > Time.
Time Page: Allows you to customize the appearance of the time
of day.
Format: Allows you to select a 12-hour or a 24-hour display
time.
Time Zone: Allows you to select the time zone for the device.
You can select Auto to set the time zone automatically
based on your GPS position.
Changing the Units of Measure
You can customize units of measure for distance and speed,
elevation, depth, temperature, and pressure.
1
Select the Orange key.
2
Select Setup > Units.
3
Select a measurement type.
4
Select a unit of measure.
Position Format Settings
NOTE: Do not change the position format or the map datum
coordinate system unless you are using a map or chart that
specifies a different position format.
Select Setup > Pos. Format.
Format: Sets the position format in which a given location
reading appears.
Datum: Sets the coordinate system on which the map is
structured.
Spheroid: Shows the coordinate system the device is using.
The default coordinate system is WGS 84.
Fitness Settings
Select Setup > Fitness.
Auto Lap: Sets the device to automatically mark the lap at a
specific distance.
User: Sets the user profile information
HR Zones: Sets the five heart rate zones for fitness activities
(page
11).
FIT Activity: Sets the type of fitness activity being performed.
This allows your activity type to appear correctly when you
transfer your activity data to Garmin Connect.
Foot Pod Speed: Sets the speed to Off, Indoor, and Always
On
(page
11).
Setting Your Fitness User Profile
The device uses information that you enter about yourself to
calculate accurate data. You can modify the following user
profile information: gender, age, weight, height, and lifetime
athlete
(page
10).
1
Select the Orange key.
2
Select Setup > Fitness > User.
3
Modify the settings.
(page
9).
9