Garmin Fenix 5x Посібник користувача - Сторінка 26
Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Garmin Fenix 5x. Garmin Fenix 5x 49 сторінок.
Друкувати сторінку
imagery, BlueChart
marine charts, and City Navigator
®
street maps. To purchase map data and view
compatibility information, go to garmin.com/maps.
represents your location on the map. When you are
navigating to a destination, your route is marked with
a line on the map.
Viewing the Map
1 From the watch face, select
2 Hold MENU, and select an option:
• To pan or zoom the map, select Pan/Zoom.
TIP: You can select
up and down, panning left and right, or zooming.
You can hold to select the point indicated by the
crosshairs.
• To see nearby points of interest and waypoints,
select Around Me.
Saving or Navigating to a Location on the Map
You can select any location on the map. You can save
the location or start navigating to it.
1 From the map, hold MENU.
2 Select Pan/Zoom.
Controls and crosshairs appear on the map.
3 Pan and zoom the map to center the location in the
crosshairs.
4 Hold
to select the point indicated by the
crosshairs.
5 If necessary, select a nearby point of interest.
6 Select an option:
• To start navigating to the location, select Go.
• To view the location on the map, select Map.
• To save the location, select Save.
• To view information about the location, select
Review.
Navigating with the Around Me Feature
You can use the around me feature to navigate to
nearby points of interest and waypoints.
NOTE: The map data installed on your device must
include points of interest to navigate to them.
1 From the map, hold MENU.
2 Select Around Me.
Icons indicating points of interest and waypoints
appear on the map.
3 Select UP or DOWN to highlight a section of the
map.
FĒNIX
5X
®
> Map.
to toggle between panning
®
4 Select
.
A list of points of interest and waypoints in the
highlighted map section appear.
5 Select
to select a location.
6 Select an option:
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select
Review.
Compass
The device has a 3-axis compass with automatic
calibration. The compass features and appearance
change depending on your activity, whether GPS
is enabled, and whether you are navigating to a
destination. You can change the compass settings
manually
(Compass Settings, page 34)
compass settings quickly, you can select
compass widget.
Altimeter and Barometer
The device contains an internal altimeter and
barometer. The device collects elevation and pressure
data continuously, even in low-power mode. The
altimeter displays your approximate elevation based on
pressure changes. The barometer displays
environmental pressure data based on the fixed
elevation where the altimeter was most recently
calibrated
(Altimeter Settings, page 34)
altimeter or barometer settings quickly, select
the altimeter or barometer widgets.
History includes time, distance, calories, average
pace or speed, lap data, and optional ANT+ sensor
information.
NOTE: When the device memory is full, your oldest data
is overwritten.
Using History
History contains previous activities you have saved on
your device.
1 Hold MENU.
2 Select History > Activities.
3 Select an activity.
4 Select an option:
• To view additional information about the activity,
select Details.
• To select a lap and view additional information
about each lap, select Laps.
• To select an interval and view additional
information about each interval, select Intervals.
• To view the activity on a map, select Map.
• To view the impact of the activity on your aerobic
. To open the
from the
. To open the
History
from
25