Garmin XERO C1 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Дивись. Garmin XERO C1. Garmin XERO C1 20 сторінок.

Starting a Session for Other Projectiles

Always ensure you position the chronograph so that it is not directly exposed to ejecting cartridge cases,

muzzle blast, or other hazards that may damage the chronograph.

You can use the Xero C1 chronograph to measure velocity of other projectiles that may not fit into other

categories, such as some muzzleloading firearms, shotguns with slugs, slingshots, or other weapons.

1 Select NEW SESSION > OTHER.

2 Select a velocity range.

3 If you have enabled the PROJECTILE WEIGHT ENTRY setting

• To calculate the kinetic energy of your projectile, select YES, and enter the weight of your projectile.

• To continue without calculating kinetic energy, select SKIP.

4 Point the chronograph at the target with the screen facing you.

5 Position the weapon next to the chronograph, within 15 cm (5 in.)

chronograph.

NOTE: The weapon can be positioned at any point around the chronograph as long as the weapon and

chronograph are positioned 15 to 35 cm (5 to 15 in.) away from each other. You should choose a location

that works best for your weapon.

The device detects shots and displays measurements automatically as you shoot.

You can pause an active session and resume it later. This can be useful to conserve battery power while you are

not using the device.

1 During a session, press

2 Select PAUSE SESSION.

From the main menu, select RESUME SESSION.

1 During a session, press

2 Select END SESSION.

Recording Shot Data

NOTICE

(Pro Settings,

page 11), select an option:

to 35 cm (15 in.)

of the