A-Collection SE 5332066 Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Аксесуари A-Collection SE 5332066. A-Collection SE 5332066 16 сторінок. Wireless doorbell incl. push button

Друкувати сторінку

Wireless doorbell

User manual

Carefully read these operating instructions before using and installing the product.

Features

• Modern and trendy design

• 58 selectable ringtones

• 5 optional sound volumes

• 150 m, very long range

• Easy to install and use

• Easy to add multiple transmitters or receivers

• Low power consumption

• IP55 waterproof push button with lamp

What you should know before installation

1. The transmitter(s) supplied with this kit are paired with the receiver(s) and are set to the

default ding-dong signal. OTHERWISE, refer to the Quick Start Guide to pair transmitters

with receivers and set your favourite signal.

2. It is not advisable to install the transmitter on metal surfaces as the material can block the

RF signals between the transmitter and the receiver. However, if this is the only option, we

recommend using the included adhesive pad instead of the included screws.

3. The range decreases if the battery in the transmitter is low.

4. It is not advisable to mount the transmitter outdoors without any protection. The plastic

materials can age prematurely.

Quick Start Guide

1. Adjust the volume: press the volume button on the receiver to switch between high and

low volume.

2. Set the ringtone: there are 58 different ringtones to choose from.

(1) Press the forward or back button to select your favourite signal. The receiver plays the

selected ringtone.

(2) Follow the pairing steps (2) - (3) below to synchronize the new ringing tone. The new

ringtone is set for the last synchronized transmitter.

(3) The ringtone can be set differently for each transmitter.

3. Pair a transmitter with a receiver:

(1) Select your favourite ringtone before pairing.

(2) Set the receiver using method (i) or method (ii) until a ding-dong signal is heard and the

light starts flashing to confirm pairing mode.

i) Simultaneously press the volume button and forward buttons on the receiver.

II) or press and hold the volume control button on the receiver for 5 seconds.

3 (16)