Brother 882-T51 Посібник з експлуатації - Сторінка 26

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Швейна машина Brother 882-T51. Brother 882-T51 44 сторінки. Embroidery machine

Attaching the embroidery frame to the machine

• If the embroidery frame is not correctly attached, it may hit the presser foot and damage the machine, or

cause injury to the user.

• When attaching the embroidery frame, make sure that the "Start/Stop" button is lit in red. If the "Start/

Stop" button is flashing in green, the embroidery machine may start embroidering. If the embroidery

machine accidentally starts operating, injuries may result.

• When attaching the embroidery frame, make sure that the embroidery frame does not hit any other part of

the embroidery machine.

1 Left arm

2 Thumb screws

Loosen the two thumb screws on the embroidery

frame holder.

CAUTION

1 Left arm of embroidery frame holder

Move the arm of the embroidery frame holder to the left or right

to adjust it to the size of the embroidery frame.

2 Clip on embroidery frame holder

Insert the embroidery frame into the clips on the embroidery

frame holder.

3 Positioning pin

4 Holes

5 Positioning slots

1 Mark for extra-large embroidery frame

2 Mark for large embroidery frame

3 Mark for medium embroidery frame

4 Mark for small embroidery frame

5 Align the screw with the mark.