Brother 882-T51 Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Швейна машина Brother 882-T51. Brother 882-T51 44 сторінки. Embroidery machine
Друкувати сторінку
Names of Machine Parts and Their Functions
The names of the various parts of the machine and their functions are described below. Before using the
machine, carefully read these descriptions to learn the names of the machine parts.
Front view
1 Bobbin pretension disc
Pass the thread around the pretension disk when winding the
bobbin thread.
2 Thread guide hole
Pass the thread through thread guide hole from front side to
back when winding the bobbin thread.
3 Thread cutter/holder
Cut the thread here when changing the upper thread. Also, you
can hold the thread here when not using.
4 Front hole in the thread guide
Pull the thread toward you placing the thread through the guide
hole from top to bottom.
5 Thread guide hole
Place the thread from back to front through the hole when
winding the bobbin or threading the machine.
6 Thread guide assembly support
7 Spool pin
8 Spool stand
9 Thread guide
Pass the thread through when threading the machine.
0 Bobbin winder seat
Set the bobbin when bobbin winding.
6
Thread Guide Assembly
Left side
A Bobbin winding switch
Set to the left to start bobbin winding.
B Upper thread guide pretension knob
Adjust the tension of the thread.
C Thread tension knob
Adjust the tension of the thread.
D Upper thread guide
Pass the thread through when threading the machine.
E Operation panel
F Carriage
Attach the embroidery frame holder to the carriage. When the
machine is turned on or when the machine is embroidering, the
carriage moves forward, backward, left and right.
G Lower thread guide
Pass the thread through when threading the machine.
H Thread cutter
Cuts and holds the thread for needle threading.
I Hook cover/Hook
Open the hook cover, and then insert the bobbin case into the
hook.
J Feet
Use the feet to level and adjust the height of the machine.
Note
• Circled numbers on the "Thread Guide
Assembly" indicate the thread path for
winding the bobbin.