Brother 884-T13 Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Швейна машина Brother 884-T13. Brother 884-T13 40 сторінок.

ABOUT MY DESIGN CENTER

With My Design Center, you can use the functions listed below:

• Hand-drawn functions - creating embroidery patterns by drawing on the LCD screen

• Scanning functions - creating embroidery patterns by not only scanning object with built-in camera, but also

imported data from USB media, SD card or computer.

You can also combine patterns that you have created with the machine's built-in patterns.

Starting My Design Center for

the First Time

My Design Center will be activated once the

scanning frame has been attached. After the initial

activation is complete, you no longer have to

attach the scanning frame. View the tutorial video

that shows how to use My Design Center.

Memo

• This is required only for the first time that

My Design Center is used. After the first

time, My Design Center will be available

even if the scanning frame is not attached.

• In order to use My Design Center after

upgrading the machine, attach the scanning

frame to enable My Design Center.

1. Remove the two thumb screws securing the

embroidery frame holder, and then remove the

frame holder from the machine.

a Thumb screws

2. Install the needle plate cover included with the

machine.

a Needle plate cover

Memo

• For best scanning results, be sure to install

the needle plate cover.

3. Align the holes in the scanning frame with the

pins on the frame-mounting plate of the carriage.

a Pins on the frame-mounting plate

b Holes in the scanning frame

4. Secure the scanning frame with the two thumb

screws removed in step

a Thumb screws