Brother 888-N22 Посібник з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Швейна машина Brother 888-N22. Brother 888-N22 32 сторінки.
Також для Brother 888-N22: Посібник з експлуатації (32 сторінок)

Друкувати сторінку

1. Names of Machine Parts ��4 Troubleshooting

Place another foot so that the groove and pin

align�

Groove

Note

• The presser foot to be used with each stitch

appears in the LCD�

Slowly lower the presser foot lever so that the

presser foot pin snaps into the groove�

Removing the presser foot holder

Remove the presser foot holder when installing a

presser foot that does not use the presser foot holder,

such as the walking foot * and quilting foot *�

: Sold separately with some models�

Loosen�

Presser foot

Screwdriver

holder

Note

• When attaching the presser foot holder, hold the

presser foot holder in place and tighten the screw�

Sewing Basics

CAUTION

• While the machine is in operation, pay

special attention to the needle location�

In addition, keep your hands away from

all moving parts such as the needle and

handwheel, otherwise injuries may occur�

• Do not pull or push the fabric too hard while

sewing, otherwise injuries may occur or the

needle may break�

• Never use bent needles� Bent needles can

easily break, possibly resulting in injuries�

• Make sure that the needle does not strike

basting pins, otherwise the needle may break

or bend�

Selecting the stitch

Press the stitch selection keys to change the stitch

number�

Selected stitch

Presser foot that should be used

Stitch selection keys

1 Changes the tens digit of the

stitch number�

2 Changes the ones digit of the

stitch number�

Setting the stitch length and stitch

width

• Press + or - of the stitch length keys to increase or

reduce the stitch length�

• Press + or - of the stitch width keys to increase or

reduce the stitch width�

Memo

• If a straight stitch or triple stretch stitch is

selected, changing the stitch width changes the

needle position�

Increasing the width moves the needle to the

right; reducing the width moves the needle to

the left�

Note

• The setting value changes until it reaches the

maximum or minimum value�

•

around

disappears when changed from

the standard setting�

• If "--" appears to the right of

cannot be adjusted�

, the stitch width