Garmin VIEO RV 750 Series Посібник користувача - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільна навігаційна система Garmin VIEO RV 750 Series. Garmin VIEO RV 750 Series 38 сторінок.

Друкувати сторінку

Adjusting the Audio Settings for a Zone

Select

Select a zone.

Select MORE.

Select one or more options:

NOTE: Not all options are available for all zones.

• To limit the maximum volume output of this zone, select

VOLUME LIMIT, and adjust the level.

• To set the subwoofer level for this zone, select SUB

LEVEL, and adjust the level.

• To adjust the right and left speaker balance of this zone,

select BALANCE, and adjust the balance.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency for each zone, which can enhance the blend of

the sound produced by the speakers and the subwoofer. Audio

signals above the selected frequency are not passed to the

subwoofer.

NOTE: If a DSP setting has been applied to zone, this setting

cannot be changed on the stereo. You can view the DSP setting

for the optimal cutoff frequency as calculated by the DSP

controller, but cannot adjust it.

Select

Select a zone.

Select SUB FREQ.

Select a frequency.

DSP Settings

This stereo features digital signal processing (DSP). You can

select pre-configured DSP settings for FUSION speakers and

amplifiers to optimize audio reproduction in their installed

locations.

All DSP settings are configured using the FUSION-Link

control app

(FUSION-Link Wireless Remote Control App,

page

22).

Configuring the DSP Settings

You must download and install the FUSION-Link remote control

app on your compatible Apple or Android device before you can

configure the DSP settings

Control App, page

22).

You can configure the DSP settings to optimize the sound on

each zone with the installed speakers, amplifiers, and

environment.

From the settings menu on your Apple or Android device,

connect to the stereo using Bluetooth technology, or connect

to the same wireless network as the stereo.

Open the FUSION-Link remote control app on your

compatible Apple or Android device.

If necessary, select the stereo you want to configure.

Select

> MUSIC SETTINGS.

Select a zone.

Select DSP SETTINGS.

Configure the DSP settings as needed, depending on the

models of FUSION speakers and amplifiers connected to the

zone.

Repeat these steps for each zone.

After you have finished configuring the DSP settings for all

zones, select an option:

• On an Apple device, select

SEND DSP SETTINGS

• On an Android device, select

SETTINGS.

Media Playback

> ZONE.

(FUSION-Link Wireless Remote

> Zone > SETTINGS >

> Zone > SEND DSP

Bluetooth Device Playback

You can pair the stereo to up to eight Bluetooth media devices.

You can control the playback using the stereo controls on all

Bluetooth devices, and on some devices you can browse the

music collection from the menu on the stereo. On Bluetooth

devices that do not support media browsing, you should select

the song or playlist on the media device.

The availability of song information such as song title, artist

name, track duration, and album art depends on the capability of

the media player and music application.

Connecting a Compatible Bluetooth Device

You can play media from a compatible Bluetooth device using

the Bluetooth wireless connection.

You can control the music playback with the media app on a

Bluetooth device or using the FUSION-Link remote control app

(FUSION-Link Wireless Remote Control App, page

Select the BT source.

Select

> DISCOVERABLE to make the stereo visible to

your compatible Bluetooth device.

Enable Bluetooth on your compatible Bluetooth device.

Bring the compatible Bluetooth device within 10 m (33 ft.) of

the stereo.

On your compatible Bluetooth device, search for Bluetooth

devices.

On your compatible Bluetooth device, select the stereo from

the list of detected devices.

On your compatible Bluetooth device, follow the on-screen

instructions to pair and connect to the discovered stereo.

When pairing, your compatible Bluetooth device may ask you

to confirm a code on the stereo. The stereo does not display

a code, but it does connect correctly when you confirm the

message on the Bluetooth device.

remote

™

If your compatible Bluetooth device does not immediately

connect to the stereo, repeat steps 1 through 7.

The DISCOVERABLE setting is disabled automatically after two

minutes.

NOTE: On some Bluetooth devices, adjusting the volume on the

device affects the volume level on the stereo.

Bluetooth Range Information

The stereo and Bluetooth wireless devices have a range of 10 m

(33 ft.). For optimal performance, the Bluetooth wireless device

should also have a clear line of sight to the stereo.

Selecting a Different Bluetooth Source

When you have more than one Bluetooth device paired to the

stereo, you can select a different source when needed. You can

pair the stereo with up to eight Bluetooth devices.

With the BLUETOOTH source selected, select

Select a Bluetooth device.

Bluetooth Source Settings

With the BLUETOOTH source selected, select

DISCOVERABLE: Allows the stereo to be visible to Bluetooth

devices. This setting turns off automatically after two minutes

to prevent possible interruption to audio after pairing a

Bluetooth device to the stereo.

REMOVE DEVICE: Removes the Bluetooth device from the

stereo. To listen to audio from this Bluetooth device again,

you must pair the device again.

USB Device Playback

You can connect various USB media players, USB flash drives,

and smartphones to the stereo. How you access the USB

22).