alkitronic CL Series Посібник з експлуатації та технічного обслуговування - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Інструменти alkitronic CL Series. alkitronic CL Series 12 сторінок. Compact torque multiplier
Також для alkitronic CL Series: Посібник з експлуатації та технічного обслуговування (12 сторінок)

Друкувати сторінку

Operating and maintenance manual

3.3

Maintenance

The alkitronic® torque multipliers are extremely

powerful, robust products. To ensure durability

and performance over many years, regular main-

tenance is required (performance check, engine

check, safety check).

Maintenance periods: Regularly 1x per year or after max.

1000 hours of operation if used properly.

alkitronic® multipliers should only be shipped to your al-

kitronic® Partner or to alki TECHNIK GmbH in the original

packaging to avoid damage.

In the event of prolonged periods without operation, the

motor of the alkitronic® multiplier must be supplied with oil

via the connector (1) of the compressed air supply at the pis-

tol grip (Fig. 8). This prevents corrosion damage to the motor

lamella (see Section 4.1, Air lubrication).

Protect the compressed air supply on the multiplier with a

protective cap to prevent dirt from entering.

Technical details

4.1

Air lubrication

Brand/Type

Properties:

Specification / Use:

(The manufacturer does not guarantee for other brands)

4.2

Noise emission and vibrations

The sound pressure level measured at maximum engine

power exceeds 85 dB (A). The measurements were carried

out in accordance with the noise measurement method DIN

EN ISO 15744: 2008-11.

Vibration: There are no significant vibrations.

alkitronic® torque multipliers with lower sound pressure lev-

els (<85 dB (A)) are available as special versions. When fitting

with silencer elements, the torque characteristics must be

corrected accordingly.

Fig. 8

Aral /Vitam DE 10

Resin and acid-free, moisture-

binding, high corrosion- and

wear protection

SAE 10W

Oil viscosity 40°C: -10 cST,

2-3 drops per min. during

continuous operation

Declaration of conformity

alki Technik GmbH declares in sole responsibility: The

alkitronic® pneumatic multipliers identified by types CLS,

CLS 2, CLD, CLV and serial numbers 913001 - 913699, built in

2019, complies with all relevant regulations such as directives /

standards / safety regulations:

2006/42/EG,

DIN EN ISO 12100:2011-03,

DIN EN ISO 4414:2011-04,

DIN EN ISO 13849-2.2013-02,

DIN EN ISO 11148 6:2013-05,

DIN EN ISO 15744:2008-11

Technical Documents at alki TECHNIK GmbH,

Unterlettenweg 4, 85051 Ingolstadt / Germany.

Maintenance unit

Regulator type

Controller function

Pressure supply

Installation position

Ambient temperature

Operating pressure

min./max.

Control range min./max.

Filter element

Container volume Filter

Drain valve

Filling type

Container volume Oiler

Pressure control valve Button for filling the oiler by suction

on the lower part of the container

Connection for oil extraction and filling

Art. No. 20350 - Maintenance unit complete

including 5 m hose, bracket and special oil

January 2019

Alexander Kipfelsberger,

Managing Director

diaphragm pressure control valves

with secondary venting

on one side

vertical

min. -10°C /max. +50°C

1.5 bar (21.75 PSI) /

16 bar (232 PSI)

0.5 bar (7.25 PSI) /

8 bar (116 PSI)

exchangeable

49 cm³ / 2.45 inch³

semi-automatic,

depressurised open

manual oil filling

semi-automatic oil filling

during operation

80 cm³/ 4.9 inch³