AEG SteamCrisp 7000 Series Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Духовка. AEG SteamCrisp 7000 Series. AEG SteamCrisp 7000 Series 36 сторінок.
Друкувати сторінку
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.
5.4 How to set: Water hardness
When you connect the oven to the mains you have to set the water hardness level.
Use the test paper or contact your water supplier to check the water hardness level.
Step 1
Put the test paper into
water for about 1 sec. Do
not put the test paper un‐
der running water.
The colours of the test paper continue to change. Do not check water hardness later than 1 min after test.
You can change the water hardness level in the menu: Settings / Setup / Water hardness.
The table shows water hardness range (dH) with the corresponding level of Calcium deposit
and the water classification. Adjust the water hardness level according to the table.
Water hardness
Level
dH
1
0 - 7
2
8 - 14
3
15 - 21
4
≥22
When the tap water hardness level is 4, fill the water drawer with still bottled water.
6. DAILY USE
WARNING!
Refer to Safety chapters.
Step 2
Shake the test paper to re‐
move the excess of water.
Test paper
.
Step 3
After 1 min, check water
hardness with the table
below.
Calcium depos‐
Calcium de‐
it (mmol/l)
posit (mg/l)
0 - 1.3
1.4 - 2.5
2.6 - 3.8
≥ 3.9
Step 4
Set the water hardness lev‐
el: Menu / Settings / Setup /
Water hardness.
Water classifi‐
cation
0 - 50
soft
51 - 100
moderately hard
101 - 150
hard
≥151
very hard
ENGLISH
11