Garmin GPSMAP 720 Короткий довідник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий довідник для Морська система GPS Garmin GPSMAP 720. Garmin GPSMAP 720 2 сторінки. Bail mount template (multilingual)
Також для Garmin GPSMAP 720: Інструкція з монтажу Посібник з монтажу (10 сторінок), Технічна довідка (42 сторінок), Важлива інформація про безпеку (48 сторінок), Шаблон (2 сторінок)

Друкувати сторінку

Turning the Chartplotter On or Off

WARNING



See the Important Safety and Product Information guide in the product box for product

warnings and other important information.

Turning On the Chartplotter

Press and release the

Power

key.

Turning Off the Chartplotter

Press and hold the

Power

key.

Marking a Waypoint or an MOB Location

Marking Your Present Location as a Waypoint

From the Home screen, select Mark.

Note: Mark your present position from any other screen by touching

the screen.

Creating a Waypoint at a Different Location

1. From the Home screen, select

Charts.

2. Select

Navigation Chart

Fishing

Chart..

3. Complete an action:

•

Touch a location on the chart.

•

Touch and drag the screen to pan to a new location. Touch a location on the chart.

4. Select

Create

Waypoint.

5. If you want to name the waypoint, select the waypoint on the right side of the screen and

select

edit

Waypoint.

6. Select

Name

and enter a name.

Marking and Navigating to an MOB Location

When you mark your current location as a waypoint, you can designate it as a man overboard

(MOB) location.

Complete an action.

•

From any screen, select

Mark

Man

overboard.

•

From the Home screen, select

Man

overboard.

An international MOB symbol marks the active MOB point and the chartplotter sets a course

back to the marked location using the Go To feature.

Adjusting the Backlight

1. From the Home screen, select

tIP: Press and release the

2. Select Backlight.

3. Adjust the backlight:

•

Select

Auto

to allow the chartplotter to adjust the backlight automatically, based on

ambient light.

•

Adjust the slider manually.

Note: Select

Auto

to switch between Auto and Manual mode.

Showing and Configuring the Heading Line

The heading line is an extension drawn on the map from the bow of the boat in the direction

of travel. You can configure the appearance of the heading line for the Navigation chart or the

Fishing chart.

Mark

at the top of

Note: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.

1. From the Home screen, select Charts.

2. Complete an action:

•

Select

Navigation Chart

Heading

Line.

Fishing Chart

•

Select

Line.

3. Complete an action:

•

Select Distance. Enter the distance to the end of the heading line.

•

Select time. Enter the amount of time until you reach the end of the heading line.

4. Select Done.

Configure

System

Beeper/Display

> Display.

Power

key from any screen to open the Display screen.

Navigation Chart Setup

Chart Appearance

Fishing Chart Setup

Chart Appearance

Heading

Navigating to a Marine Service

Navigating to a Marine Services Destination

CAUTION



The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart

information. That data does not ensure obstacle and bottom clearance. Carefully compare the

course to all visual sightings and avoid any land, shallow water, or other obstacles that may be

in your path.

When using Go To, a direct course and a corrected course may pass over land or shallow water.

Use visual sightings and steer to avoid land, shallow water, and other dangerous objects.

Note: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card.

1. From the Home screen, select

Where to?

2. Select the marine service category to which you want to navigate.

The chartplotter shows a list of the 50 nearest locations and the distance and bearing to each.

3. Select a destination.

tIP: Select

to view additional information or to show the location on a

chart.

4. Complete an action:

to.

•

Select

Route

to.

•

Select

Guide to

•

Select

to use Auto Guidance.

5. Review the course indicated by the magenta line.

Note: When using Auto Guidance, a gray line within any part of the magenta line indicates

that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the

settings for minimum safe water depth and minimum safe obstacle height.

6. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

Go to

www.garmin.com

for additional documentation and information.

Garmin

, the Gamin logo, GPSMAP

, BlueChart

Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be

used without the express permission of Garmin.

May 2010

Part Number 190-01155-01 Rev. B

offshore

Services.

, and g2 Vision

are trademarks of Garmin

Printed in Taiwan