Garmin GPSMAP 8500 Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Морська система GPS Garmin GPSMAP 8500. Garmin GPSMAP 8500 12 сторінок. Installation instructions
Card Reader Connections
Connecting to Power
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place will void the product warranty.
1
Route the power cable to the power source and to the
device.
2
Connect the red wire to the positive (+) battery terminal, and
connect the black wire to the negative (-) battery terminal.
3
Install the locking ring and o-ring on the end of the power
cable.
4
Connect the power cable to the device by turning the locking
ring clockwise.
Connecting the Card Reader to the Garmin Marine
Network
The card reader is not compatible with Garmin chartplotters
prior to the GPSMAP 8000 Series and GPSMAP 8500.
Connect the card reader to a Garmin device on the Garmin
Marine Network using a Garmin Marine Network cable.
Data from cards inserted in the card reader is shared with all
compatible devices on the Garmin Marine Network.
Appendix
Specifications
Physical Specifications
Specification
Measurement
63
Dimensions (H×W×D) 15
/
64
mm)
Weight
10.85 lbs (4.92 kg)
Temperature range
From 5° to 131°F (from -15° to 55°C)
Material
Aluminum
Power Specifications
Measurement
Input power
Fuse
Max. power usage at 10 Vdc
Typical current draw at 12 Vdc
Max. current draw at 12 Vdc
NMEA 2000 LEN
NMEA 2000 Draw
Compass-safe distance
NMEA 2000 PGN Information
Type
PGN
Transmit and
059392 ISO acknowledgment
receive
059904 ISO request
060928 ISO address claim
126208 NMEA: Command, request, and
126464 Transmit and receive PGN list group
126996 Product information
129026 COG and SOG: Rapid update
129029 GNSS position data
WARNING
55
27
× 4
/
× 9
/
in. (406 × 123.5 × 239.5
64
64
Specification
10–35 Vdc
7.5 A, 42 V fast-acting
17 W
0.8 A
1.7 A
2
75 mA max.
5½ in. (140 mm)
Description
acknowledge group function
function
Type
PGN
129540 GNSS satellites in view
130306 Wind data
130312 Temperature
Transmit
127250 Vessel heading
127258 Magnetic variance
128259 Speed: Water referenced
128267 Water depth
129025 Position: Rapid update
129283 Cross track error
129284 Navigation data
129285 Navigation route and waypoint info
Receive
126992 System time
127250 Vessel heading
127489 Engine parameters: Dynamic
127488 Engine parameters: Rapid update
127493 Transmission parameters: Dynamic
127505 Fluid level
128259 Speed: Water referenced
128267 Water depth
129025 Position: Rapid update
129038 AIS class A position report
129039 AIS class B position report
129040 AIS class B extended position report
129539 GNSS DOPs
129794 AIS class A static and voyage related
129809 AIS class B "CS" static data report, part
129810 AIS class B "CS" static data report, part
130310 Environmental parameters
130311 Environmental parameters (obsolete)
130313 Humidity
130314 Actual pressure
NMEA 0183 Information
Type
Sentence
Transmit
GPAPB
GPBOD
GPBWC
GPGGA
GPGLL
GPGSA
GPGSV
GPRMB
GPRMC
GPRTE
GPVTG
GPWPL
GPXTE
PGRME
PGRMM
Description
data
A
B
Description
APB: Heading or track controller
(autopilot) sentence "B"
BOD: Bearing (origin to
destination)
BWC: Bearing and distance to
waypoint
GGA: Global positioning system
fix data
GLL: Geographic position
(latitude and longitude)
GSA: GNSS DOP and active
satellites
GSV: GNSS satellites in view
RMB: Recommended minimum
navigation information
RMC: Recommended minimum
specific GNSS data
RTE: Routes
VTG: Course over ground and
ground speed
WPL: Waypoint location
XTE: Cross track error
E: Estimated error
M: Map datum
11