Garmin GPSMAP 8600 series Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Морська система GPS Garmin GPSMAP 8600 series. Garmin GPSMAP 8600 series 6 сторінок.
Також для Garmin GPSMAP 8600 series: Інструкція з монтажу Посібник з монтажу (9 сторінок), Інструкція з монтажу Посібник з монтажу (9 сторінок)
Друкувати сторінку
If the original waypoint was taken from a map, there
should be a legend on the map that lists the map datum
and position format used to create that map. Most often
this is found near the map key.
2
Select Settings > Units.
3
Select the correct map datum and position format
settings.
4
Create the waypoint again.
My chartplotter will not acquire GPS signals
If the device is not acquiring satellite signals, there could
be a few causes. If the chartplotter has moved a large
distance since the last time it has acquired satellites or has
been turned off for longer than a few weeks or months, the
device may not be able to acquire the satellites correctly.
• Make sure the GPS antenna has a clear view of the sky
to receive the GPS signal.
If it is mounted inside of a cabin, it should be close to a
window so it can receive the GPS signal.
• Make sure the GPS antenna is connected to the
NMEA
network.
®
• If the chartplotter has more than one GPS antenna
source, select a different source.
• Ensure the device is using the latest software, and
update the device software if necessary.
Updating the Device Software
You may need to update the device software when you
install this device or add an accessory to the network. You
can use one of two methods to update the software.
• Use the ActiveCaptain app.
• Download the update from www.garmin.com/support
/software/marine.html using a memory card (32 GB
max.) and a computer running Windows
system.
For more information, see the owner's manual at
www.garmin.com/manuals/GPSMAP8400-8600.
Registering Your Device
Help us better support you by completing our online
registration today. You can register your device using one
of two methods.
• Use the ActiveCaptain app.
• Go to my.garmin.com/registration and sign into your
Garmin account to register the device.
Keep the original sales receipt, or a photocopy, in a safe
place. After you add devices to the chartplotter network,
register the new devices.
Quick Start Manual
operating
®
5