Garmin quatix Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Морська система GPS Garmin quatix. Garmin quatix 22 сторінки. Gps watch
Також для Garmin quatix: Декларація про відповідність (6 сторінок), Посібник із швидкого старту (6 сторінок), Інформація про продукт (44 сторінок)

Друкувати сторінку
Garmin quatix Посібник користувача
The two pointer marks
blue mark
points in the direction you are facing.
9
Align the pointer marks with the top blue mark.
10
Continue to travel in that direction until you reach the
destination.

Stopping Navigation

1
Select the blue key.
2
Select Stop Nav..

Waypoints

Waypoints are locations you record and store in the device.

Creating a Waypoint

You can save your current location as a waypoint.
1
Hold the blue key.
2
Select an option:
• To save the waypoint without changes, select Save.
• To make changes to the waypoint, select Edit, make
changes to the waypoint, and select Save.

Finding a Waypoint by Name

1
Select the blue key.
2
Select Waypoints > Spell Search.
3
Use the blue key,
, and
4
When finished, select _ > Done.

Navigating to a Waypoint

1
Select the blue key.
2
Select Start GPS.
3
Wait while the device locates satellites.
4
Select the blue key.
5
Select Waypoints, and select a waypoint from the list.
6
Select Go.
The device displays time to destination
destination
, and estimated time of arrival
7
Select
to view the compass page.
Navigation
serve as a bearing pointer. The top
to enter characters.
, distance to
.
The two pointer marks
blue mark
points in the direction you are facing.
8
Align the pointer marks with the top blue mark.
9
Continue to travel in that direction until you reach the
destination.

Editing a Waypoint

Before you can edit a waypoint, you must create a waypoint.
1
Select the blue key.
2
Select Waypoints.
3
Select a waypoint.
4
Select Edit.
5
Select an item to edit, such as the name.
6
Use the blue key,
, and
7
When finished, select _ > Done.

Increasing the Accuracy of a Waypoint Location

You can refine a waypoint location for more accuracy. When
averaging, the device takes several readings at the same
location and uses the average value to provide more accuracy.
1
Select the blue key.
2
Select Waypoints.
3
Select a waypoint.
4
Select Average.
5
Move to the waypoint location.
6
Select Start.
7
Follow the on-screen instructions.
8
When the confidence reaches 100%, select Save.
For best results, collect four to eight samples for the waypoint,
waiting at least 90 minutes between samples.

Projecting a Waypoint

You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
Select the blue key.
2
Select Waypoints.
3
Select a waypoint.
4
Select Project.
5
Follow the on-screen instructions.
The projected waypoint is saved with a default name.

Deleting a Waypoint

1
Select the blue key.
2
Select Waypoints.
3
Select a waypoint.
4
Select Delete > Yes.

Deleting All Waypoints

1
Select the blue key.
2
Select Setup > Reset > Waypoints > Yes.
serve as a bearing pointer. The top
to enter characters.
3