Garmin Cessna Caravan G1000 Посібник пілота - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник пілота для Морське обладнання Garmin Cessna Caravan G1000. Garmin Cessna Caravan G1000 21 сторінка. Integrated flight deck
Також для Garmin Cessna Caravan G1000: Посібник пілота (16 сторінок), Посібник пілота (6 сторінок), Посібник пілота (32 сторінок), Посібник пілота (25 сторінок), Посібник пілота (34 сторінок), Доповнення до Керівництва з льотної експлуатації літака (33 сторінок), Посібник пілота (22 сторінок)

OPERATION

DIGITAL CLEARANCE RECORDER WITH

PLAYBACK CAPABILITY

The GMA 1347 provides a digital clearance recorder

with playback capability of up to 2.5 minutes of COM sig-

nal recording. Recorded COM signals are stored in sepa-

rate memory blocks. Signals from all of the selected COM

radios are recorded and can be played back. Anyone able

to hear the selected COM radios is able to hear the COM

signal playback.

Once the 2.5 minutes of recording time have been

reached, the recorder begins recording over the stored

memory blocks, starting from the oldest block. Powering

off the unit automatically clears all recorded blocks.

NOTE: In split COM mode the pilot or copilot

COM audio can be conﬁgured for recording and

playback. Contact a Garmin-authorized service

center for details.

6A-14

Figure 6A.3.7 Playback

Garmin G1000 Audio Panel Pilot's Guide

The PLAY key controls the playback function.

• Pressing PLAY once plays back the latest recorded

memory block, then returns to normal operation.

• Pressing PLAY during playback of a memory block

halts the playback of this block and plays back the

preceding recorded block. The PLAY key can be

used to backtrack through the recorded memory

blocks to reach and play back any desired block.

NOTE: Pressing the MKR/MUTE key during

playback halts playback and returns the recorder/

playback to normal operation.

During playback, the PLAY annunciator light blinks

approximately once per second. If a COM input signal is

detected during playback, playback is halted and the new

COM input signal is recorded as the latest block.

NOTE: The recorder can be disabled using an

external switch or permanently disabled by a

Garmin-authorized service center.

NOTE: If the COM muting on receive option

is enabled, only the primary COM radio signal

reception is recorded by the digital clearance

recorder.

190-00378-02 Rev. A