Garmin FUSION APOLLO MS-WB675 Посібник - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник для Морське обладнання Garmin FUSION APOLLO MS-WB675. Garmin FUSION APOLLO MS-WB675 46 сторінок. Marine entertainment system
Також для Garmin FUSION APOLLO MS-WB675: Інструкція з монтажу Посібник з монтажу (19 сторінок)
Друкувати сторінку
Source name
Active zone and status icons
Track details (if available)
Album art (if available from a compatible source)
Elapsed time, track duration, and the current track number out of the total number of tracks in the playlist
(if available)
Naming the Device
You should provide a unique name for this device so you can easily identify it when viewing devices on the
Fusion PartyBus network.
NOTE: You should provide unique names for all of the devices and zones on the network to avoid confusion
when grouping, controlling, and setting up stereos and zones. You should also turn off zones that are not in use
(Speaker Zone Settings,
page 25).
For further customization, you can provide unique names for the sources on each stereo and turn off unused
sources
(General Settings,
1 Select
> SETTINGS.
2 Select the device to rename.
3 Select DEVICE NAME, and select an option:
• Select a pre-defined name from the list.
• Select CUSTOM NAME, and enter a unique name for the device.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default when you turn the dial on the remote control.
1 Select
> SETTINGS.
2 Select the name of the remote control you plan to use with this stereo.
3 Select ASSIGN HOME ZONE.
4 Select a zone.
Selecting a Source
1 Select
.
2 Turn the dial to highlight a source.
NOTE: If the device is part of a group, continue turning the dial to access the sources on other devices in the
group
(Fusion PartyBus Networking,
If a source cannot be shared with the group, it will appear gray and you cannot select it.
3 Press the dial to select the source.
Getting Started
(Network Status Icons,
page 25).
page 22).
page 35)
5