Garmin GHC 10 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Морське обладнання Garmin GHC 10. Garmin GHC 10 26 сторінок. Flush moun template
Також для Garmin GHC 10: Посібник із швидкого старту (21 сторінок), Декларація про відповідність (1 сторінок), Шаблон (1 сторінок), Інструкція (2 сторінок)

route To

The autopilot steers the boat according to a route defined on your

chartplotter. Your GHC 10 must be connected to a NMEA 2000 or NMEA

0183 compatible chartplotter to use route to.

Following the route To Pattern

Before you can begin using route to, you must define a route on your

chartplotter. Refer to the owner's manual included with your chartplotter for

information on how to define a route.

From the heading screen, select Menu > GPS Steering > Route To.

The autopilot steers your boat according to the route defined on your

chartplotter, and the heading screen shows the distance to the next turn ➀

and distance off course

➋

GHC 10 Owner's Manual

➊

➋

The orbit pattern steers the boat in a continuous circle around the active

waypoint

(page

8). The size of the circle is defined by your distance from the

active waypoint when you begin the orbit pattern. There are no settings to

adjust.

Following the Orbit Pattern

1. From the heading screen, select Menu > GPS Steering > orbit >

engage.

2. Select an option:

• Select

to begin a clockwise turn.

• Select

to begin a counter-clockwise turn.

The autopilot steers your boat in a continuous circle around the active

waypoint, and the heading screen shows the direction of orbit

Powerboat Autopilot Operation

➊