AEG F45700VI0P Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина AEG F45700VI0P. AEG F45700VI0P 24 сторінки.

Друкувати сторінку
10
www.aeg.com
2. Press
• The indicators
go off.
• The indicator
flash.
• The end indicator indicates the
current setting: End indicator on
= the rinse aid dispenser is
activated (factory setting).
3. Press
End indicator off = the rinse aid
dispenser is deactivated.
4. Press the on/off button to confirm
the setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
.
,
continues to
to change the setting.
How to activate the acoustic
signal for the end of
and
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
until the indicators
and
2. Press
• The indicators
• The indicator
• The end indicator indicates the
current setting: End indicator off
= Acoustic signal off.
3. Press
End indicator on = Acoustic signal on.
4. Press the on/off button to confirm
the setting.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
How to activate XtraDry
Press simultaneously
indicator
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
and
,
start to flash.
,
go off.
continues to flash.
to change the setting.
and
. The
comes on.
,
and