AEG FAVORIT 44050 Vi Інструкція користувача - Сторінка 27

Переглянути онлайн або завантажити pdf Інструкція користувача для Посудомийна машина AEG FAVORIT 44050 Vi. AEG FAVORIT 44050 Vi 48 сторінок. Fully integratable dishwasher
Також для AEG FAVORIT 44050 Vi: Інформація про користувача (40 сторінок)

AEG FAVORIT 44050 Vi Інструкція користувача

Starting a dishwashing cycle

0
1. Check that the dishes and cutlery are stacked in the dishwasher in such
a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
4. Press the relevant button for the cycle required (see "Programme
Table").
The cycle display will become illuminated.
5. Close the dishwasher door. The dishwashing cycle will begin.
If an acoustic error message can be heard after the cycle has begun,
3
please read the section "What to do if ...".
Changing/interrupting/cancelling a dishwashing
cycle
Only change or interrupt a dishwashing cycle that is in progress if it is
3
absolutely necessary. After the appliance has been closed again, the air
that has entered will be heated significantly and expand. As a result,
water may collect in the base of the appliance and trigger the anti-
flood system.
Changing a dishwashing cycle
If you would like to change the dishwashing cycle before closing the
3
dishwasher door, briefly press the button for the new dishwashing
cycle.
If you would like to change the dishwashing cycle after the cycle has
commenced, proceed as follows:
Hot steam may escape when the dishwasher door is opened. There is a
1
risk of scalding! Carefully open the door of the dishwasher.
1. Open the door of the dishwasher. The dishwashing cycle will stop.
0
2. Press the button for the new dishwashing cycle and hold it down.
First, the indicator for the dishwashing cycle that is currently running
will flash.
After several seconds only the indicator for the new dishwashing cycle
will be flashing.
3. Release the cycle button.
Operating Instructions
27