Garmin T5 mini Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Garmin T5 mini. Garmin T5 mini 24 сторінки. Dog collar device
Також для Garmin T5 mini: Посібник користувача (8 сторінок), Посібник із швидкого старту (10 сторінок), Посібник із швидкого старту (4 сторінок)

Друкувати сторінку
Garmin T5 mini Посібник користувача

Dog Status Icons

Sitting
Running
On point
Treed
Unknown*
*The unknown status icon indicates that the collar has not
acquired a satellite signal and that the handheld device cannot
determine the location of the dog.

Dog Tracking Compass

To open the dog tracking compass, select
You can use the dog tracking compass to view the direction and
distance to your dog. The dog tracking compass also shows the
dog's status, such as running or on point
The color of the pointer corresponds to the color of the dog
track.
The dog tracking compass is most accurate when the dog is
more than 30 ft. (9.1 m) away. When the dog is less than 30 ft.
(9.1 m) away, "Near" appears.

Navigating to Your Dog

1
Select Dog List.
2
Select the dog.
3
Select Show Info > Go.
The map opens.
4
Follow the magenta line to the dog.
5
If necessary, select
to track the dog using the dog tracking
compass.
Tracking with BaseCamp™ BaseStation
Before you can track your dogs and contacts using BaseCamp,
you must download BaseCamp to your computer
(www.garmin.com/basecamp).
The BaseStation feature of BaseCamp allows you to track your
dogs and contacts in real-time on a computer. For more
information on using BaseCamp, see the help file in the
application.
1
Select Setup > System > BaseCamp BaseStation >
Prompted.
2
Open BaseCamp.
3
Follow the on-screen instructions.

Pausing Dog Tracking

You can pause the tracking of a single dog during a hunt. This
can be helpful if the dog is taking a break.
1
Select Dog List.
Dog Training
2
3

Pausing All Dog Tracking

If you are moving the dogs during a hunt and you do not want to
record the transportation of the dogs, you can pause the
tracking of all of the dogs.
1
2

Location Alerts

Location alerts notify you when your dogs or contacts enter or
exit a particular location. You can create a custom geofence or
use a radius around your current location.
.
A geofence is an invisible boundary around an area and is
created using points on the map. The virtual boundaries of a
geofence are accurate up to approximately 10 ft. (3 m).
Geofences perform best when sized to cover an area
encompassing an average sized backyard (approximately
¼ acre).
Setting a Geofence Alert
You can set up an invisible boundary around an area and
receive an alert when a dog or contact enters and exits that
area.
1
2
3
4
Setting a Radius Alert
You can receive an alert when a dog or contact gets within or
(Dog Status
Icons).
outside of a certain distance away from you.
1
2
3

Editing Location Alerts

1
2
3
You should research and investigate the training methods best
suited for you, your dog, and your needs. This manual provides
some basic guidelines for training, but each dog has unique
training needs.
When used properly, the Alpha training system is a very
effective training tool to aid your dog in reaching its full potential.
The use of the training system should be part of an overall
training program.
Begin training your dog on a leash, without the Alpha training
system. You should train your dog how to heel, sit, and come to
you. After the dog understands these three basic commands,
you can begin training with the dog collar device and the leash.
Finally, when the dog consistently obeys commands using the
leash and collar, you may be able to remove the leash to train
with only the dog collar device.
Select a dog.
Select Show Info >
> Stop Tracking.
Select
.
Select
> Pause All Tracking.
Select Setup > Location Alerts > Add Alert > Geofence.
Select a point on the map, and select Use.
Repeat step 2 to define a geofence with up to 10 points.
Select Done.
Select Setup > Location Alerts > Add Alert > Radius.
Select the unit of measurement.
Enter the radius distance, and select
Select Setup > Location Alerts.
Select an alert.
Select an option:
• Select Disable to turn off notifications for this alert.
• Select Set Alert Type to set the way the device notifies
you for this alert.
• Select Set Alert Mode to set the notification to sound on
exit, entrance, or both.
• Select Delete to remove the alert.
Dog Training
.
5