AEG OKO FAVORIT 64800 Інструкція з експлуатації Посібник з експлуатації - Сторінка 28

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Посудомийна машина AEG OKO FAVORIT 64800. AEG OKO FAVORIT 64800 48 сторінок. Aeg dishwasher öko favorit 64800
Також для AEG OKO FAVORIT 64800: Інструкція з експлуатації Посібник з експлуатації (43 сторінок), Інструкція з експлуатації Посібник з експлуатації (42 сторінок)

8b. Set and start the programme with "DELAY START"

Select the wash programme by simply pressing one of the programme

push buttons, the display will show the running time of the

programme in minutes and the indicator lights of the phases

corresponding to the programme will illuminate.

If necessary select the "SMALL LOAD" by pressing the corresponding

push button (in this case the running time of the programme will be

adjusted).

With the selection of the programmes "QUICK 50°" and "PREWASH"

this option is not available.

Press the "DELAY START" push button, in the display appears h1. Select

the time by repeatedly pressing the "DELAY START" push button until

the required number of hours appear in the display. You can delay the

start of a programme up to a maximum of 12 hours (h12).

To cancel the setting of the delay start press the push button until the

running time of the selected programme reappears in the display.

If the setting of the programme has been made with the door

opened:

close the door and the dishwasher starts the countdown automatically

after 5 seconds. The number of hours to go before the programme

starts appears in the display and decreases from hour to hour. The

letter h flashing in the display indicates that the delay start is active.

If the setting of the programme has been made with the door

closed:

the dishwasher will start the countdown automatically after 5 seconds

from the last pressure of a push button.

Once the delay set has elapsed the programme will start automatically,

the indicator lights of the phases turn off except for the light of the

phase under way. The displayed time will start to decrease from minute

to minute.