AEG OKO_FAVORIT 60800 Інструкція користувача - Сторінка 30
Переглянути онлайн або завантажити pdf Інструкція користувача для Посудомийна машина AEG OKO_FAVORIT 60800. AEG OKO_FAVORIT 60800 44 сторінки. Aeg dishwasher
Також для AEG OKO_FAVORIT 60800: Інструкція користувача (44 сторінок)
Друкувати сторінку
Operating Instructions
...Error messages
• If fault code (2 is displayed on the multi-display or the WATER indi-
cator is illuminated, you can probably rectify the fault yourself.
After rectifying a (2 fault and a fault related to the WATER indica-
tor, press the button for the wash programme that has been started.
The wash programme continues. If the fault code is displayed again,
contact AEG Service Force.
• For all other faults, please contact AEG Service Force, stating the
fault code.
Symptom
The programme indica-
tor for the selected
programme is flashing
and the WATER indica-
tor is illuminated:
there is no water run-
ning into the dish-
washer.
Fault code (2 is dis-
played on the multi-
display.
The programme indica-
tor for the selected
wash programme is
flashing.
Fault code (3 is dis-
played on the multi-
display.
The FILTER indicator is
illuminated.
30
Possible Cause
Tap is blocked or furred with
lime-scale.
The filter (where present) in
the threaded hose fitting is
blocked.
The water inlet hose is not
correctly laid.
The sink outlet is blocked.
The water drain hose is not
correctly laid.
The leak prevention system
has been triggered.
The FILTER indicator is only
intended to remind you to
check the filter in the dish-
washer from time to time
and, if necessary, to clean it.
It illuminates at regular
intervals, independent of the
amount of soiling of the fil-
ter.
Solution
Clean tap.
Clean the filter in the
threaded hose fitting.
Check hose installation.
Clean the sink outlet.
Check hose installation.
Close the tap and contact
your local AEG Sevice Force
Centre.
The indicator goes out auto-
matically on the start of the
next wash programme.